Top 10 Whirlpool Icemaker Emitter Sensor Control R

0

Nowadays, there are so many products of whirlpool icemaker emitter sensor control r in the market and you are wondering to choose a best one.You have searched for whirlpool icemaker emitter sensor control r in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings whirlpool icemaker emitter sensor control r which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

688 reviews analysed

1. 4389102 Refrigerator Icemaker Emitter Sensor Control Board Kit Compatible for Whirlpool Maytag Kenmore Replace 2198586 2220398 W10757851 AP5956767 ADC9102 PS557945 AP3137510 by TOPEMAI

4389102 Refrigerator Icemaker Emitter Sensor Control Board Kit Compatible for Whirlpool Maytag Kenmore Replace 2198586 2220398 W10757851 AP5956767 ADC9102 PS557945 AP3137510 by TOPEMAI

Feature

Description

This particular Electronic Control Board is specific to Whirlpool brands including:

Kenmore,Maytag, Magic Chef, Amana, Admiral, Estate, Inglis, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Glenwood, and Caloric.

4389102 Refrigerator Icemaker Emitter Sensor Control Board Kit Replace Part Numbers: 

2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, AP5956767, AP3137510, 

PS557945, PS10064583, TJ4389102R, W10193666, W10193840, W10290817, W10757851.

4389102 refrigerator control board AKA w10193666 whirlpool,4389102 kenmore,w10290817 kitchen aid,whirlpool optics w10757851,whirlpool 2198588,whirlpool 2220398,whirlpool w10757851,whirlpool ap5956767,whirlpool 2255114,whirlpool 4389102.

Replacing the Electronic Control Board could solve your appliance problem as below:

symptoms:

1) The ice maker will not make ice

2) The ice maker will not stop making ice

3) The ice maker seems to have stopped working properly

How To Replace The 4389102 Ice Maker Optic Control Boards  for Whirlpool:

1): Unplug the refrigerator.Remove the three Phillips screws on the right hand side.

2): Disconnect the wire harness on the back side and then remove the two screws to release the receiver control board from the housing.

Re-install the receiver board in the reverse order.

3): Remove the three screws on the left hand side.

4): Disconnect the wire harness on the top side and then remove the two screws to release the emitter control board from the housing.

Re-install the emitter board in the reverse order.

Tips: If you are not a mechanic,we recommend you to take a photo before removing the old parts to avoid forgetting how to install new parts!

Package Includes:

1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

2. 4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510

4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510

Feature

Description

Super Exquisite and Durable Icemaker Control Board Kit

How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.

How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.

Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

3. Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)

Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)

Feature

Description

Size:1-(Pack)

Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.

4. Heating Thermostat Aquarium Probe Sensor Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V 1200W NO Cooling

Heating Thermostat Aquarium Probe Sensor Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V 1200W NO Cooling

Feature

Description

Features:

Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, No cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: aquarium sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Dimension:
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
Temperature calibration
Over-temperature and sensor fault alarm
Warranty: 1 Year

Package Content:
1x Temperature controller ITC-306T with Aquarium Probe
1x Manual

5. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding

Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding

Feature

6. WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

Feature

Description

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)

Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)

Package Content:
1x WH1436A Temperature controller
1x sensor cable

7. Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)

Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)

Feature

8. 4389102 Ice Maker Control Board Replacement Kit Emitter Board & Receiver Board, for Whirlpool Kenmore Maytag Emitter Sensor Refrigerators. Replaces PS557945, ADC9102, AP3137510

4389102 Ice Maker Control Board Replacement Kit Emitter Board & Receiver Board, for Whirlpool Kenmore Maytag Emitter Sensor Refrigerators. Replaces PS557945, ADC9102, AP3137510

Feature

9. Honeywell Home T9 WIFI Smart Thermostat with 1 Smart Room Sensor, Touchscreen Display, Alexa and Google Assist

Honeywell Home T9 WIFI Smart Thermostat with 1 Smart Room Sensor, Touchscreen Display, Alexa and Google Assist

Feature

Description

Style:Thermostat with Sensor

Smart Thermostat with Smart Room Sensor

10. Thrustmaster TWCS Throttle Controller for PC, Black

Thrustmaster TWCS Throttle Controller for PC, Black

Feature

Description

Thrustmaster has devoted its 25 years of expertise in flight sim controllers to meet the growing demand from flight simmers in general – and space simmers in particular – who have requested a mid-range standalone throttle. The TWCS Throttle (Thrustmaster Weapon Control System) has been designed for advanced fliers looking for comprehensive, ergonomic, comfortable and precise throttle for a realistic in game immersion. The TWCS Throttle is compatible with PC via USB in Windows 10, 8, 7 and Vista (32-bit and 64-bit).

Conclusion

By our suggestions above, we hope that you can found Whirlpool Icemaker Emitter Sensor Control R for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general