Nowadays, there are so many products of sprinkler pump 2 hp 2″npt in the market and you are wondering to choose a best one.You have searched for sprinkler pump 2 hp 2″npt in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings sprinkler pump 2 hp 2″npt which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
772 reviews analysed
1. FLUENTPOWER 1 HP Portable Stainless Steel Lawn Sprinkling Pump with 1" NPT Female Thread for Garden Irrigation and Pressure booster
Feature
- 【Garden Sprinkler Pump】- With stainless housing and waterproof on/off switch, easy carry handle for portability and storage
- 【1HP High Power High Efficiency】- The pump has maximum flow rate of 845 gallons per hour, Maximum Lift head up to 144ft and Max suction depth 8m
- provides the necessary power to booster water pressure and connects to sprinklers
- 【Pure Copper Motor with Thermal Protection】- Pure copper motor can bring better and more lasting work to the pump, overheat protection ensures that the pump will not be burned out.
- 【Idea Use For】Pump is designed to work only with CLEAN WATER, Sutiable for ponds, pools, sprinkling systems, flow irrigation systems, gardening, rain barrels, large aquariums, use in agriculture settings, shallow and water wells. The pump is also compatible with a pressure regulator and work as a booster pump.
- 【12 Month Warranty】The pump has 1″ NPT female thread and is easy to set up with 1″ hose or adapter.
2. Barnes 103544 Model SEV412AT Sewage Pump with Wide Angle Switch, 1/2 hp, 115V, 1 Phase, 2" NPT Discharge, 71 GPM, 25′ Head, 20′ Cord, Automatic
Feature
- FOR SEWAGE USE: Designed for handling wastewater in typical basement or small lift station applications
- SPLIT CAPACITOR MOTOR: For increased reliability, higher performance, longer motor life, great starting torque and lower amp draw
- HIGH CAPACITY PUMPING: Large 2″ NPT discharge
- Passes 2” spherical solids
- 3450 RPM
- Lifts water up to 25 feet
- ROBUST DESIGN: Stainless steel shaft and hardware
- Heavy duty industrial carbon/ceramic seal
- Oil lubricated ball bearings
- LIMITED WARRANTY: Purchase includes a 24-month limited warranty
Description
Barnes sewage pumps pack incredible power into an efficient, compact frame. With just a 10” x 7” footprint, the Barnes SEV412AT is able to discharge up to 4,260 gallons an hour and up to 25 feet of vertical height.
Designed for everyday septic tank use, Barnes sewage pumps are able to handle most low and high head residential and light commercial wastewater applications.
All of our sewage pumps feature a dual ball bearing design and cast iron impellers. They’re robustly designed with a stainless steel shaft and heavy-duty seal for long operational life and dependable service.
The Barnes SEV412AT pump is equipped with a 20 ft. waterproof power cord and a 2″ NPT discharge pipe for high capacity pumping. A permanent, split capacitor motor allows for optimum performance while a high-efficiency 1/2-HP motor packs the power needed to get the job done.
Every Barnes sewage pump is CSA C/US listed and backed by a 24-month limited warranty. Order yours today!
3. AMT Pump 3793-95 Sprinkler Booster Pump, Stainless steel, 2 HP, 1 Phase, 115/230V, Curve D, 1-1/2" NPT Female Suction & Discharge Ports
Feature
- Closed impeller for use in pressure-boosting transfer and sprinkler applications
- Built-in flapper/check valve permits self-priming to 20 feet
- Cast iron with buna-n mechanical seal and O-ring
- Maximum operating temperature 180 degrees F
- 1-1/2″ and 2″ female NPT suction port, 1-1/2″ and 2″ female NPT discharge port
Description
This AMT self-priming sprinkler and booster pump has a cast iron housing and 1-1/2 or 2″ female NPT suction and discharge ports. The pump is self-priming to 20 vertical feet (after initial fill) with its built-in check valve and has a stainless steel high-efficiency closed impeller. The pump housing has buna-n mechanical seals and O-rings, its double volute chamber reduces radial load on the impeller, and both the volute and impeller are replaceable. The motor enclosure is either totally enclosed, fan cooled (TEFC) for protection from dust and indirect water spray or open, drip proof (ODP) for protection from dripping water, depending on the model. This portable pump is suitable for use in applications such as in pressure-boosting transfer and sprinkler applications.
Specifications
| Motor | 1.5 to 7.5 hp, ODP or TEFC |
| Pump | Centrifugal self-priming with dual volute |
| Maximum flow rate | Ranges from 80 to 157 gpm |
| Impeller | Stainless steel, high efficiency, closed |
| Suction port | 1-1/2″ or 2″ NPT |
| Discharge port | 1-1/2″ or 2″ NPT |
| Maximum operating temperature | 180 degrees F |
| Maximum solids handling | Ranges from 1/16″ to 5/16″ |
Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump’s movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.
American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps. The company is headquartered in Royersford, PA.
4. GOULDS Pumps GT20 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 2 hp, Blue
5. Red Lion RLSP-150 1-1/2-HP 50-GPM Cast Iron Sprinkler Pump
Feature
- Rugged cast iron casing and pump base
- High efficiency thermoplastic impeller and diffuser
- Bi models are configured with brass impeller, rlsp series can be set for use with 115 volts or 230 volts
- 2 inch NPT suction and 1-1/2 inch NPT discharge, self-priming to 25′
- Maximum pressures to 47 psi, flow rates to 89 U.S. Gpm , repair kits available
6. AMT Pump 316A-95 Sewage & Trash Pump, Cast Iron, 3 HP, 3 Phase, 230-460V, Curve A, 2" NPT Female Suction & Discharge Ports
Feature
- Clog-resistant impeller handles semi-solids up to 1″ diameter for use in waste water and chemical processing
- 3 hp, 3 phase, TEFC, 230/460V, 8/4 amp motor
- Cast iron with Viton/silicon carbide mechanical seal and Viton O-ring
- Maximum operating temperature 180 degrees F
- 2″ female NPT suction port, 2″ female NPT discharge port
Description
This AMT 316A-95 engine-driven sewage and trash pump has a cast iron housing, a 3 hp, 3 phase, 230/460V TEFC electric motor, and 2″ female NPT suction and discharge ports. This pump has A curve performance with a 150 gallons per minute (gpm) maximum flow rate and 62 feet maximum vertical lift at 3,450 RPM. The pump is self-priming to 20 vertical feet (after initial fill) with its built-in check valve, and its clog-resistant impeller handles fluids containing up to 15 percent semi-solids. The pump housing has Viton (FKM, fluoroelastomer)/silicon carbide mechanical seals and Viton O-rings for corrosion resistance. The housing’s double volute chamber reduces radial load on the impeller, and both the volute and impeller are replaceable with the removal of four bolts. The motor enclosure is totally enclosed, fan cooled (TEFC) for protection from dust and indirect water spray and complies with National Electrical Manufacturers Association (NEMA) 56J standard for mounting dimensions. This portable pump is suitable for use in applications such as in sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, sludge and slime, and waste water.
Specifications
| Motor | 3 hp, 230/460V, 8/4 amp, 3 phase, TEFC |
| Pump | Centrifugal self-priming with dual volute |
| Maximum flow rate | 150 gpm |
| Impeller | Stainless steel self-cleaning, semi-open |
| Suction port | 2″ NPT |
| Discharge port | 2″ NPT |
| Maximum operating temperature | 180 degrees F |
| Standards met | NEMA 56J |
| Maximum solids handling | 1″, 15 percent of total volume |
| Dimensions* | 19.9/50.5** x 9.3/23.6** x 8.8/22.3 (L x W x H) inches/centimeters |
* L is length, the horizontal distance from front to back; W is width, the horizontal distance from left to right; H is height, the vertical distance from lowest to highest point
**This measurement may vary due to motor manufacturer’s specifications
Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump’s movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.
American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps. The company is headquartered in Royersford, PA.
7. WaterAce WA50SAS Sump Pump, 1/2 HP, Black
Feature
- Heavy duty cast iron construction with thermoplastic volute
- Built-in thermal overload motor protection
- Vertical switch
- operates in basins 11” in diameter
- Non-clogging vortex, thermoplastic impeller
- 1/2” solids handling
- Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information
Description
The WaterAce products WA50SAS cast iron sump pump is made with heavy duty cast iron construction and a thermoplastic volute. It has built-in thermal overload motor protection. The vertical switch allows it to operate in 11 inch basins. The WA50SAS has a non-clogging vortex and a thermoplastic impeller that will handle up to 1/2 inch solids. WaterAce products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The WaterAce commitment is to produce pumps for the long term at the best value. Click on the WaterAce products link at the top of this page to see more WaterAce products.
8. 1/2 HP Shallow Well Jet Pump by Lanchez Stainless Steel Water Pump Transfer Removal Irrigation Pumps for Clean Water 960GPH
Feature
- 1/2 HP
- Flow rate to 960 gallons per hour
- Corrosion-resistant stainless steel construction extends product life and is easy to clean.
- Lower noise and emergy-efficient motor with thermal overload protection.
- Designed for continuous duty use in watering application. Suitable use in garden, lawn, farm and rural house.
- UL certificated. TIP: Please add some water to the outlet before operation.
9. WAYNE PC4 1/2 HP Cast Iron Multi-Purpose Pump With Suction Strainer
Feature
- N/A
- The product is manufactured in China.Generates up to 50 PSI at outlet hose
- generates up to 15 ft. of suction lift at inlet hose
- The product is highly durable and easy to use
- Easy installation and easy handling
- 1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
- Use to pump out flooded basements, tanks, or boats
- Made from durable cast iron steel
- Connects to garden hose with 3/4-inch brass hose connections
- 1-year limited warranty
Description
Product Description
1/2 HP, Cast Iron, Portable Utility Pump, Pumps Up To 1450 GPH at 0′, Portable Cast Iron Transfer Utility Pump, High Performance 1/2 HP, Motor Boosts Line Pressure Up To 40 PSI, 3/4″ Brass Hose Adapters Connect To Standard Garden Hose, Portable Transfer Pump, You Can Take Anywhere & Plug In, Easy Prime Priming Outlet, Applications Include Drainage, Dewatering Flooded Basements, Emptying Stock Tanks, Draining Water Heaters, Charging Polyglycol Radiant Heating Lines, Easy Carry Cast Iron Handle For Portability, Reinforced Thermoplastic Suction Strainer Included. The product is manufactured in China. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It’s made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.
10. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Feature
- N/A
- Imported
- Assembled in the US with foreign and domestic parts.
- Tested to 1 million cycles*
- Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
- Top suction strainer filters debris and protects pump from clogging. The pump does not require weep holes and the cast iron seal plate prevents galvanic corrosion and leaks
- High capacity 1-1/2″ npt discharge
- Heavy duty oil filled motor for long life
- Cast iron pump housing for durability
Description
Product Description
1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed
Conclusion
By our suggestions above, we hope that you can found Sprinkler Pump 2 Hp 2Npt for you.Please don’t forget to share your experience by comment in this post. Thank you!
