887 reviews analysed
1. Replacement K-Cup Holder Needle Assembly For All Keurig 2.0 Models (Full Assembly)
COMPATIBILITY: Keurig models K200, K225, K250, K275, K300, K325, K350, K360, K375, K400, K425, K450, K460, K475, K500, K525, K550, K560, K575, K60, K625, K650, K675
2. Blendin Replacement K-Cup Holder Part with Exit Needle, Fits Keurig K10, K40, K45, K50, K60, K65, K70, K75, K77, K79
Fits Keurig Single Cup Coffee Brewer System Models: K10, K40, K45, K50, K55, K60, K65, K70, K75, K77, K79, B10, B40, B45, B50, B55, B60, B65, B70, B75, B77, B79
3. Brewer Needle Cleaning Tool/Maintenance Accessory – Compatible With Keurig 2.0 – No More Grounds In Your Coffee or Partial Brews by Impresa
- NO MORE PARTIAL BREWS OR GROUNDS IN YOUR COFFEE: Are you getting partial / interrupted brews, grounds in your coffee, or a “water under pressure” message? There’s a good chance you have a clogged entrance / exit needle caused by a natural build-up of coffee grounds. Our tool removes those grounds and gets your Keurig (R) brewer running smoothly again
- LENGTHENS THE LIFE OF YOUR MACHINE: Our needle cleaning accessory is a key aspect of your brewer maintenance, along with regular cleaning and descaling. A clogged needle, if left untreated for too long, can lead your machine to break down. Don’t let that happen – regularly clean your brewing needle!
- COMPATIBLE WITH KEURIG (R) 2.0: Compatible with all Keurig (R) 2.0 and Plus Series brewers / coffee makers / coffeemakers, including model #s K200, K250, K300, K350, K375, K400, K450, K460, K475, K500, K550, K560, K575, K600, K650, K660, K675. Will not work with K55 Machine or K-Elite.
- EASY TO USE: Super simple to use – just a few minutes and you’ll be back up and running! Instructions below. NOTE: Will not work with non-Keurig (R) brewers or other Keurig (R) models not listed
- Please note: This is an aftermarket replacement product (produced by Impresa Products). We have no affiliation with or endorsement from any of the manufacturers mentioned
INSTRUCTIONS FOR USE: 1) Ensure that your brewer is powered off. 2) Ensure that the silicone chamber is seated in the plastic holder with the entrance facing up. 3) Entirely fill the silicone chamber with warm water. 4) Lift the handle (where you would normally place a pod) and place the cleaning tool in the pod holder. 5) Ensure that the cleaning tool is fully seated and flush with the pod holder. If it is not fitting in, adjust until it fits smoothly. 6) Raise and lower the handle 5 times, each (5 ups and 5 downs). This will flush water through the needle to remove the coffee grounds. 7) Remove the cleaning tool from the pod holder. You will see collected coffee grounds. 8) Perform a cleansing brew, ensuring that there is a mug on the drip tray. NOTE: Ensure that the pod slot is empty during the cleaning brew. Some models may require you to hold down the brew button (to brew 6 ounces of hot water). 9) Once the brew is complete, pour the contents of the mug into the sink. Rinse the cleaning tool with warm water and allow to fully air dry. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Keurig (R) OEM product and Impresa Products has no affiliation with or endorsement from Keurig (R). Our product is not covered under any Keurig (R) manufacturer’s warranty. The Keurig (R) brand names and logos are the registered trademarks of their owners. Any use of the Keurig (R) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility. Does not work with K-Elite or K-55 Machines
4. Keurig 4335457458 B01MXFTW88 2.0 Needle Cleaning Tool, kkk Orange
- Keurig 2. 0 Brewer maintenance accessory cleaning tool is for Keurig 2. 0 machines (will not work with other Keurig machines)
- Will not work with other brands of Coffee makers.
- Cleaning tool will only help with Cleaning clogged needles. Will not help with other Coffee maker issues.
- Includes instruction manual
- Genuine Keurig Product
Keurig 2. 0 Brewer maintenance accessory cleaning tool is for Keurig 2. 0 machines. It will not work with other Keurig machines. It will not work with other brands of Coffee makers. Cleaning tool will only help with Cleaning clogged needles. It will not help with other Coffee maker issues. Includes instruction manual. Genuine Keurig Product
5. Replacement Water Reservoir for Keurig B40, B41, B44, B45, B50, K40, K45 Brewing Systems – 48 oz (Black)
This 48 ounce water reservoir is a replacement part exclusively for the \”Elite\” and \”Classic\” Brewing Systems. (Brewer is not included.) Compatible ONLY with Keurig B4x/K4x models. This will NOT be compatible with the K50, K55 and the new K-Classic.PLEASE LOOK UNDERNEATH YOUR BREWER FOR THE MODEL NUMBER TO ENSURE COMPATIBILITY.
6. Brewslang K-cup Holder Replacement Part for Keurig B130, B140, B145, B150, B155, K140, K145, K150, K155, B3000 and K3000
- Brewslang K-cup Holder Replacement Part for Keurig Single Cup Coffee brewers.
- The K-cup Holder is a part that holds the k-cup which contains coffee blends.
- Package includes: One K-cup Holder Replacement Part
- Fits models: Keurig B130, B140, B145, B150, B155, K140, K145, K150, K155, B3000 and K3000
– Factory Replacement Part for the Keurig Single Cup Coffee brewers that it holds the K-cup Coffee for brewing – Includes One K-Cup Holder And Exit Needle Replacement For Keurig. – K-cup Pods Holder Has Integrated Stainless Steel Lower Exit Piercing Needle.
7. Brewslang K-cup Holder Replacement Part for Keurig K10, K40, K45, K60, K65, K70, K75, K77, K79
- Brewslang K-cup Holder Replacement Part for Keurig K10, K40, K45, K60, K65, K70, K75, K77, K79
- The K-cup Holder is a part that holds the k-cup portion pack which contains coffee blends.
- Package includes: One K-cup holder and one bonus Brewslang coffee scoop
- Fits model: Keurig K10, K40, K45, K60, K65, K70, K75, K77, K79
Brand bew k-cup holder replacemet part for keurig single cup brewer. Includes bottom punching needle.
8. 12-Pack KEURIG Compatible Water Filters by K&J – Universal Fit (NOT CUISINART) Keurig Compatible Filters – Replacement Charcoal Water Filters for Keurig 2.0 (and older) Coffee Machines
- ► UNIVERSAL FIT (NOT CUISINART) – These Keurig compatible filters made by K&J will fit Keurig coffee makers, including Keurig 2.0 machines as well as Keurig Single Cup Reservoir Brewing and any of the following machinces: Elite,Classic, Ultra, Special Edition, Ultimate, Platinum, B40, and B70. WILL NOT FIT “KEURIG-CUISINART”
- ► MICROMESH MATERIAL – Ensures the charcoal stays in the filter and does not clog up your Keurig coffee maker. K&J is the highest quality of any filter currently sold!
- ► IMPROVES BEVERAGE FLAVOR – Removing impurities, calcium, chlorine, and odors with activated charcoal filters creates the best-tasting beverages.
- ► ECO-FRIENDLY PACKAGING – We ship your Keurig compatible filter replacements not in a bulky box, but individually sealed with minimal packaging.
- ► FINE-GRAIN CHARCOAL – Finer charcoal granules increase the surface area exposure to water and maximize the effective filtration. K&J makes the most effective replacement cartridge for a Keurig water filter on the market!
9. Keurig K-Cup Holder & Needle Replacement Part K10, K40, K45, K6,0 K65, K70, K75, K77, K79, B31, B40, B45, B50, B55, B60, B65, B70, B75
- One K-Cup Pod holder replacement part with puncture needle for single serve capsule brewers.
- Keurig K-Cup brewer models K10, K40, K45, K6,0 K65, K70, K75, K77, K79, B31, B40, B45, B50, B55, B60, B65, B70, B75.
- Also fits Breville and Cuisinart models.
- This part is the compartment that holds the pod and pierces it in the brewing process.
Fits in the brew chamber of a Keurig brewer. Replacement Keurig K-Cup Holder With Puncture Needle. The K-cup Holder is the part of the brewer that holds the K-Cup containing the coffee. Works with models K10 K40 K45 K60 K65 K70 K75 K77 K79 B31 B40 B45 B50 B55 B60 B65 B70 B75, Breville, and Cuisinart K-Cup Brewers.Does NOT work with Keurig 2.0 Brewers, or Keurig commercial brewers K150, K150P, K155, K155P, B150, B150P, B155, B155P, K130, B130, K140, B140, OfficePro. For the correct fitting part for these brewers, search for ASIN B078HQ42PR
10. Keurig 2.0 Thermal Carafe, 32oz Double-Walled, Vacuum-Insulated, Stainless Steel Carafe, Holds and Dispenses Up to 4 Cups of Hot Coffee. For Use With Keurig 2.0 K-Cup Pod Coffee Makers
- Now with new packaging!
- 4-Cup Capacity (32 oz. capacity)
- Double -wall stainless steel construction keeps beverages hotter than plastic carafes
- Sensor mechanism keys to brewer and interacts with user interface
- Compatibility: For use with the Keurig® 2.0 brewing system only. Product not compatible with Keurig® K-Cup®, Rivo® or Vue® brewers.
Designed exclusively for Keurig Plus Brewers to guarantee the perfect pot of coffee with the simplicity you’ve come to expect from the Keurig brand. Hand-wash only
By our suggestions above, we hope that you can found Replacement Needle For Keurig 20 for you.Please don’t forget to share your experience by comment in this post. Thank you!