Top 10 Ram Mount For Iphone For Range Rover

The RAM-B-166-UN7U consists of a 3.25″ twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today’s vehicles, the RAM X-Grip is the cell phone holder evolved.

The RAM-D-111U-C consists of a 3.68″ diameter round base, SHORT double socket arm and 11″ x 3″ rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

The RAM-B-149Z-UN7U consists of a zinc coated u-bolt base, double socket arm and universal X-Grip cradle. Included in this package is hardware that will accommodate rails from 0.50″ to 1.25″ in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included composite rail adapter can narrow the rail to a minimum width of 0.5″. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today’s vehicles, the RAM X-Grip is the cell phone cradle evolved.

The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions:
Minimum Width = 1.875″ (Minimum Height = 4.25″)
Maximum Width = 3.25″ (Minimum Height = 2.25″)
Depth = 0.875″

RAM flat surface horizontal single swing arm mount, Mfg# RAM-109H, with two Pivot points (base & bracket). braket is pre-drilled to match a wide variety of devices.

RAM stands for Round-A-Mount and was introduced in 1995. Far and away the most innovative product line of its kind, RAM continues to evolve into one of the most sought after accessories for electronics. RAM products have quickly become an essential mounting component for a wide variety of applications including rugged vehicle, industrial, military and defense, material handling as well as any application requiring a robust mounting solution.

Consists of a 2.5″ diameter Round base with the Universal amps hole pattern, double socket arm and Universal Spring loaded RAM X-Grip cradle for cell phones. Designed into the mount is a 1″ diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position.

The RAP-B-166-UN7U consists of a 3.25″ twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today’s vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 5s, Apple iPhone 5c, Apple iPhone 5, Apple iPhone 4S, Apple iPhone 4, Apple iPhone 3GS, Apple iPhone 3G, Apple iPhone, Apple iPod touch (All Models), Apple iPod (G1-G5), Samsung GALAXY S4, Samsung GALAXY S5. The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875″ Maximum Width = 3.25″, Depth = 0.875″.

The RAM-B-400-HOL-UN7BU consists of the Tough-Claw rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip cradle for phones. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625″ – 1.5″ outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Ideal for vehicle windshields, the RAM-B-166-UN10U consists of a 3.3″ diameter RAM Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM X-Grip large phone holder. The RAM X-Grip features an ‘X’ design that expands and contracts to provide a perfect fit for your device even if it’s in a case. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite, this large version of the RAM X-Grip fits phones ranging from 1.75″ to 4.5″ in width and keeps your device completely functional and accessible. RAM ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM X-Grip includes a device tether that is recommended for added security and peace of mind.

The RAM-B-101U consists of a double socket arm and two 2.5″ diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM’s patented design dampens shock and vibration, helping to extend the life of your device.