Top 10 Outborard 6 Hp

0

We spent many hours on research to finding outborard 6 hp, reading product features, product specifications for this guide. For those of you who wish to the best outborard 6 hp, you should not miss this article. outborard 6 hp coming in a variety of types but also different price range. The following is the top 10 outborard 6 hp by our suggestions

849 reviews analysed

1. HANGKAI 6HP 2 Stroke Heavy Duty Outboard Motor Boat Engine w/Water Cooling System

HANGKAI 6HP 2 Stroke Heavy Duty Outboard Motor Boat Engine w/Water Cooling System

Feature

Description

Notice: 

Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10 hours). (If you do not know how to handle this, please contact with us.)

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don’t do the following will avoid cylinder Scoring:

1. start the motor on the shore

2. use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

When there is

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Technical Parameters:

Dimension

Overall length 1040mm(40.9 in)

Overall width 872mm(34.3 in)

Overall height 332mm(13.1 in)

Transom height 44CM(17.3 in)

Performance:

Full throttle operating range 5000-6000r/min

Maximum output 4.4KW/6HP

Idling speed ( in neutral) 1000±100 r/min

Engine

Gear positions Forward-neutral-reverse

Gear ratio 2.15(28/13)

Trim and tilt system: Manual tilt

Drive unit

Recommended fuel Regular unleaded gasoline

Integral fuel tank capacity 2.5L

Recommended engine oil 2-stroke outboard motor oil

Engine oil type Genuine or recommended 2str engine oil

Lubrication System Engine oil mixed gasoline

Engine oil mixing ratio Fuel 50: Engine oil 1

Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine

Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)

Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)

Short shaft: 40cm

2. DOMINTY 6HP 4 Stroke Heavy Duty Outboard Motor Boat Engine w/Air Cooling System

DOMINTY 6HP 4 Stroke Heavy Duty Outboard Motor Boat Engine w/Air Cooling System

Feature

Description

NOTE:
 1. Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don’t mix the gasoline with engine oil.

 2. The motor couldn’t reach the reverse gear.

 3. The propeller and the bottom shaft not installed onto the motor when you receive. It’s easy to have them installed.


Specifications:
Model:vertical axis.single cylinder.air cool.four stroke.hand pull
Max. Output: 6.0HP
Stroke:      4-stroke
Bore and stroke: 70x45mm
Displacement(ml): 173
Compression ratio: 7.8:1
Max power : 3.2KW/3600rpm
Max torque: 9N.m/2500rpm
Ignition system: transistor non-contact electronic ignition
Startup model: hand pull
Noise exhaust method: muffler out machine and emission directly    
Outboard model: spline drivehard shaft?spiral bevel gear
Steering: vertical axis, counterclockwise
Installation method: fix racks or intensify bracket
Propeller configuration counterclockwise: three blade or two blade anti-wind
Trim and tilt system :manual tilt
Transmission system:centrifugal clutch
Lubrication method: splash
Lubricating oil: standard hyperboloid gear oil
Reduction ratio:22:15
Built-in fuel tank volume:1.0L
Oil(engine oil) tank volume:0.6L
Packing dimension: 96 x 50 x 38cm
Weight: 29.0kg

Pay attention not to test the motor on the ashore but in the water.  
 

3. QIZHI Outboard Motors,6HP 2-Stroke Outboard Motor Marine Engine Water Cooling Fishing Boat Yacht Engine Inflatable Boat Motor

QIZHI Outboard Motors,6HP 2-Stroke Outboard Motor Marine Engine Water Cooling Fishing Boat Yacht Engine Inflatable Boat Motor

Feature

Description

All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don’t do the following will avoid cylinder Scoring:
1.start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10hours). (if you do not know how to handle this, please contact with us )

Technical Parameters
Dimension
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)

Performance
Full throttle operating range 5000-6000r/min
Maximum output 4.4KW/6HP
Idling speed ( in neutral) 1000±100 r/min

Engine
Gear positions Forward-neutral-reverse
Gear ratio 2.15(28/13)
Trim and tilt system: Manual tilt

Drive unit
Recommended fuel Regular unleaded gasoline
Integral fuel tank capacity 2.5L
Recommended engine oil 2-stroke outboard motor oil
Engine oil type Genuine or recommended 2str engine oil
Lubrication System Engine oil mixed gasoline
Engine oil mixing ratio Fuel 50: Engine oil 1
Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
Short shaft :40cm

4. Anbull 2 Stroke Boat Motor, 3.6 HP Boat Engine, Outboard Motor with Air Cooling System

Anbull 2 Stroke Boat Motor, 3.6 HP Boat Engine, Outboard Motor with Air Cooling System

Feature

Description

Specification:
◆Overall length: 92CM ◆Overall width: 36.5cm ◆Overall height: 22cm ◆Transom height: 42cm ◆Full throttle perating range:4000-5000r/min
◆Maximum output:2.5kw(3.6HP)
◆Speed:13km/h
◆Type:2-stroke
◆Ignition system: CDI system
◆Starting system: Manual start
◆Staring carburetion system: Choke start
◆Propeller mark:7-1/45-A(inch)
◆The engine and the propeller ratio:2:1
◆Recommended fuel: Regular unleaded gasoline
◆Fuel to oil ratio: 25:1 (The gasoline engine must use mixed fuel with volume rate of 25:1 for No.90 gasoline to two‐stroke automobile oil.Mix and add to the tank)
◆Gear ratio: 27/13
◆Built-in fuel tank: 1.2L
◆Fuel consumption per hour: 1.5L

Feature:
1.About the noise: all the gasoline machines are noisy, the noise is the same as the motorcycle, so it is anormal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg orless , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed,please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
5.Two strokes 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

5. EWANYO 6HP Outboard Motor 4 Stroke Heavy Duty Outboard Motor Boat Engine w/Air Cooling System

EWANYO 6HP Outboard Motor 4 Stroke Heavy Duty Outboard Motor Boat Engine w/Air Cooling System

Feature

Description

Specifications:

Model: vertical axis, single cylinder, air cool, four stroke, hand pull/electric start

Max. Output: 6.0HP

Stroke: 4-stroke

Bore and stroke: 70x45mm

Displacement(ml): 173

Compression ratio: 7.8:1

Max power : 3.2KW/3600rpm

Max torque: 9N.m/2500rpm

Ignition system: transistor non-contact electronic ignition

Startup model: hand pull / electric start

Noise exhaust method: muffler out machine and emission directly    

Outboard model: spline drivehard shaft – spiral bevel gear

Steering: vertical axis, counterclockwise

Installation method: fix racks or intensify bracket

Propeller configuration counterclockwise: three blade or two blade anti-wind

Trim and tilt system :manual tilt

Transmission system:centrifugal clutch

Lubrication method: splash

Lubricating oil: standard hyperboloid gear oil

Reduction ratio:22:15

Built-in fuel tank volume:1.0L

Oil(engine oil) tank volume:0.6L

Packing dimension: 96 x 50 x 38cm

Weight: 29.0kg

Pay attention not to test the motor on the ashore but in the water.
 
NOTE:

1.Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don’t mix the gasoline with engine oil.

2.The motor couldn’t reach the reverse gear.

3.The propeller and the bottom shaft not installed onto the motor when you receive. It’s easy to install.

6. Outboard Motor Heavy Duty High-Speed Inflatable Fishing Boat Motor Engine

Outboard Motor Heavy Duty High-Speed Inflatable Fishing Boat Motor Engine

Feature

7. Fuel Pump Rpelacement with Gasket for Johnson Evinrude Outboard Motor Pre 1993 6hp 9.9 hp 15 hp Models with Replace OE # 18-7350 395091 397274 391638 397839 97839

Fuel Pump Rpelacement with Gasket for Johnson Evinrude Outboard Motor Pre 1993 6hp 9.9 hp 15 hp Models with Replace OE # 18-7350 395091 397274 391638 397839 97839

Feature

Description

OE Replace #: 397839, 391638, 395091, 9-35350, 18-7350, 397274.

Fitments:

Johnson Evinrude Marine 6hp 8hp 9.9hp 15hp Engine Seahorse Outboard 1981-1992
Evinrude 1969 1975 25hp, 1965 Johnson 9.5hp, older 70’s 25hp

8. LOYALHEARTDY Outboard Motor Boat Engine 3.6HP 2 Stroke Heavy Duty Outboard Motor with Water Cooling, 55cc Boat Machine for Kayak Fishing Boat

LOYALHEARTDY Outboard Motor Boat Engine 3.6HP 2 Stroke Heavy Duty Outboard Motor with Water Cooling, 55cc Boat Machine for Kayak Fishing Boat

Feature

Description

About Certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Features:

. Features 360 degree steering rotation for reverse without gear shifting

. Start-In-Gear protection/clutch feature prohibits prop rotation while idling

. Lift/Tilt feature for shallow water operation and convenience

. Standard CDI ignition system for easy starting and improved performance

. Vertical mount engine design for increased power, performance and durability

. Superior carbonation system with primer bulb for increased efficiency

. Twist grip throttle handle and engine stop button for improved response

. Superior outboard anti corrosion system and anodes for increased durability

. Durable cast aluminum construction for superior corrosion protection

. Through the prop exhaust outlet for decreased noise and pollutant

Shipping Weight: 21.4 pounds

Short shaft :40 cm

Stroke: 2-Stroke

Engine(HP): 3.6 HP

Ignition Systerm: CDI system

Cooling Systerm: Water Cooling

Hard to Start:

1.please make sure the ratio of Gasoline: Oil = 35:1.Please DO use special oil for 2-stroke motor.

2.press the button on the carburetor for several times until the yellow and black pipes are full of oil.

3.leave the throttle in the start position before starting,and then keep it in the ON position after running.

P.S:

The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.

Necessary: you have to prepare a boat-motor stand or Hanging board on your boat

9. OKIl Water Pump Impeller 387361/763735 for Johnson Evinrude OMC BRP 2-6HP Outboard Motor

OKIl Water Pump Impeller 387361/763735 for Johnson Evinrude OMC BRP 2-6HP Outboard Motor

Feature

Description

Description:

Water Pump Impeller 387361/763735 for Johnson Evinrude OMC BRP 2-6HP Outboard Motor 18-3090

Specification:

Material: Rubber

Diameter: Approx. 35mm/ 1.38″

Number of Blades: 6

Quantity: 1pc

Features:

– This Impeller replace Johnson/Evinrude/OMC outboard motors 387361, 763735, Sierra 18-3090

– Applications(Johnson/ Evinrude (OMC/BRP) Outboard models):

2hp 1985-90

4hp 1976-80 (90 degree gear case)

6hp 1979

Package Included:

1pc x Water Pump Impeller

Notice:

1. Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.

2. The color may have different as the difference display, pls understand.

10. US DELIVER Outboard Motor/Engine 3.5Hp-18HP Horsepower Water Cooling Inflatable Boat

US DELIVER Outboard Motor/Engine 3.5Hp-18HP Horsepower Water Cooling Inflatable Boat

Feature

Description

The Hangkai 3.5 hp-7hp 2-stroke – 4-stroke gives you all the power you need to drive a small boat. This engine delivers second-to-none fuel efficiency, while the newly designed handles and grips are easy to transport! All of this is offered at a competitive price, and it’s no wonder that this small outboard has received so much attention and praise!

Necessary: ​​You must prepare a boat motor bracket or hanging board on board

Brand: HANGKAI

Displacement: 123CC

Gear ratio: 2.08 (27:13)

Cylinder: 1

Maximum output (kw): 4.8

Max.speed(r / min): 5000-6000

Gear position: F-N-R

Packing size: 114x64x41cm

Ignition system: CDI

Cooling system: water cooled

Control system: branch control

Start the system: manually start

Control system: #93 gasoline

N.W./G.W.(kgs): 26 / 31.2

Drilling x stroke (mm): 59×45

Short axis: 40cm

Recommended propeller series: 3 -7″x9″

Recommended lubricant: four-stroke lubricant

Mixing ratio: pure gasoline

Trim and tilt system: manual tilt

Total LxWxH (cm): 78.3×34.3×103.9

Standard fuel tank capacity: 12L

Optional fuel capacity: /

Bonus accessories:

Booklet, tubing, cotter pin

Pump impeller, start rope, start key

12 litre fuel tank, toolbox, spark plug, cylinder head gasket

About certification:

We can only provide CE certification, no other certification can be provided, thank you for your understanding.

Conclusion

By our suggestions above, we hope that you can found Outborard 6 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general