The Best Ninjaflex

Go beyond the coffeehouse with the Ninja Hot and Cold Brewed System. This brewing system gives you the ability to brew hot, flavorful cups of coffee and tea or over-ice beverages, all powered by Advanced Thermal Flavor Extraction Technology with Auto-iQ. 2 Ways to Enjoy Over Ice Coffee and Tea – Choose between smooth, naturally sweet Cold Brewed coffee or tea and vivid, authentic flavored Hot Brewed iced coffee or tea that’s never diluted. Specialty Coffee and Tea Favorites – Combine super-rich coffee and tea concentrates with hot or cold frothed milk to create delicious coffeehouse-style drinks.

Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available.

Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available.

Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available.

Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available.

The new Keurig k-mini single serve Coffee maker features a new sleek design, and at less than 5” wide is the perfect size for any space or occasion. The k-mini brewer is effortlessly simple to use – just add fresh water to the reservoir, pop in your favorite K-Cup Pod, press the brew button and enjoy fresh brewed, delicious Coffee in minutes. Choose from hundreds of delicious K-Cup Pod varieties to enjoy 6-12oz of your favorite Coffee, tea, cocoa, and iced beverages. With a single cup reservoir and cord storage, The k-mini Coffee maker is the portable brewer that makes anywhere Perfect for great Coffee.