952 reviews analysed
1. 4" Car Sound Speaker (Pair) – Upgraded Blue Poly Injection Cone 2-Way 180 Watt Peak w/ Non-fatiguing Butyl Rubber Surround 110 – 20Khz Frequency Response 4 Ohm & 3/4" ASV Voice Coil – Pyle PL42BL
Feature
- 110Hz – 20Khz FREQUENCY RESPONSE: Pyle, 4” two way sound speaker system has a 20 oz magnet structure, 1/2” neodymium film dome tweeter and frequency response. This car speaker is pack with exceptional 88dB (1w/1m) decibel sensitivity
- 4-OHM IMPEDANCE: This car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. The blue poly injection cone also looks great and allows your music to resonate with full power
- 3/4” ASV VOICE COIL: Pyle car sound speaker system is capable of 3/4” high-temperature ASV voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures
- 90W RMS AND 180W PEAK: This 4” car speaker can provide up to 90 watts RMS or 180 watts peak power because it is 20 oz magnet structure. A pair of round 4’’ 180 watt speakers – carrying both the high and low end for a fuller range sound
- LOUD AND CLEAR: Pyle car speaker were carefully combined to reproduce sound clearly with outstanding responsiveness. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product
- 3/4″ high temperature ASV voice coil
- 1/2″ neodymium film dome midrange
- Includes grills, wires and mounting hardware
Description
Pyle Model : PL42BL
4” 180 Watt 2-Way Speakers
4” 180 Watt Two-Way Speakers
Pyle’s Blue Label series speakers don’t just sound great – they look great, too. Feast your eyes upon the azure curves of Pyle’s Blue Label series and you’ll agree. They’re great replacements for your vehicle’s factory speakers – you’ll hear the difference immediately. Included in this package is a pair of round 4′ two-way 180 watt speakers – carrying both the high and low end for a fuller range sound. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product. A ¾’ high-temperature ASV voice coil provides the richest sound, ensuring low distortion and providing an open sound stage. The blue poly injection cone looks great and allows your music to resonate with full power. The 20 oz. magnet structure and ½’ neodymium film dome tweeter are what power these speakers and allow for a 110 Hz – 20 kHz frequency response. Trust Pyle to provide quality sound at a competitive price.
2. 6.5 Inch Dual Marine Speakers – 2 Way Waterproof and Weather Resistant Outdoor Audio Stereo Sound System with 200 Watt Power, Poly Carbon Cone and Butyl Rubber Surround – 1 Pair – PLMR62 (White)
Feature
- COMPLETELY WATERPROOF: This is a marine speaker that’s completely waterproof and can be used for several vehicles because it can withstand heavy water splashes and other outdoor conditions
- 200 WATTS POWER: The speaker has a 20 Oz. circuit magnet for a full range audio and complete stereo speaker sound system. The power output is 100 Watts RMS/200 Watts peak. It has a frequency response of 85Hz-20Khz and 4 Ohms impedance
- WEATHER RESISTANT: It’s a weather resistant speaker made of Poly Carbon cone with butyl rubber surround for a rugged and durable design. It is also engineered with heavy duty molded ABS plastic basket and grill construction to combat sun damage
- LOW PROFILE DESIGN: Constructed with a low profile design with a sensitivity of 90db and 1” Aluminum voice coil that can be easily used on boats, marine watercraft and other vehicles. The classic white look also gives extra style to the vehicle
- 6.5” STANDARD SIZE: These marine speakers are easy to install with 6.5 inches standard size, complete wirings and mounting hardware. It has a universal standard OEM replacement size with a mounting depth of only 2.48” and cut-out size of 5.31”
Description
Pyle PLMR62 Dual 6.5” Water Resistant Marine Speakers, 2-Way Full Range Stereo Sound, Built-in Tweeters, 200 Watt, White (Pair)
3. AONKEY Cell Phone Holder for Car, Dashboard Anti-Slip Vehicle GPS Car Mount Universal for All Smartphones, Compatible iPhone XR XS Max X 8 7 6S Plus, Galaxy S10/S9 Plus S8 Note 9/8, LG V30, Pixel 3 XL
Feature
- ✅Super Compatibility: This car mount universally fits mobile phone from 3″ to 7″, like iphone Xs, Xs Max, XR, iphone X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, 6 Plus, 5S, SE, Galaxy Note 8, S8 Plus, S8, S7 Edge, LG K20 V, GPS device like Garmin etc.
- ✅STABILITY: Triple reinforcement on dashboard, large silica gel base, plus a circle of adhesive silicone film and a suction cup, make the phone holder grip firmly on your car.
- ✅SECURITY: Car holder made of high quality spring, as well as two ends of clamping go with non-skip silicone, make it hold the phone securely and won’t slide or fly out even taking a sharp turn, sudden stop or accelerate.
- ✅MOBILITY: Sticky silicone material is not permanent attachment to the dash. It can be taken off from the dash easily, and the silicone bottom become sticky as new after flush.
- ✅Perfect Driving View: Thanks to its mobility, you can put the cell phone car holder at best position for your view. Two different angels provide more choices for you to find non light reflect and clear screen view.
Description
✅>>Notice:
*This car phone holder grip rather than adhere to the dashboard, but is it sturdy enough when driving.
* Wash the bottom silicone gel before reuse
* Put on smooth and clean dashboard or surface directly
✅>>Waranty:
*30 days 100% Money Back Guarantee
*12 months Replacement Guarantee
*No Questions Asked
>>Compatible for Different Devices and Cars :
* Fit for most 3”-7” mobile phones, such as iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone 6, iPhone 6 plus, iPhone 6S, iPhone 6S Plus, iPhone 5S SE 5C, for Samsung Galaxy Note 8, S8, S8 Plus, S7, S7 Edge, LG, Nexus, HTC, LG, Nokia, even if cell phones in case, you can use directly no need to take off.
* Also work for Most GPS navigator, like Garmin Nuvi Drive DriveSmart DriveAssist, TomTom GO Start, Magellan Roadmate etc, and any other handheld devices less than 7”
* Work good for different kind of cars especially designed for SUVs such as Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, and KIA. First choice of Toyota Highlander cell phone holder.
>>Material:
* Environment friendly and sunshine resistant ABS for main body, soft silicone on bottom, strong enough to stay up when you mount your phone.
>> Features:
* Designed without magnets, no harm to the phone battery
* Compatibility for different devices and cars
* Up and down soft rubber avoid your phone be scratched
* Easy to open and hold phone. Hold easily with single hand
* The oval adhesive tape and the entire holder can be washed with water
* Multi-purpose phone holder: Besides used in the car, also can be used as a phone holder for meeting, movie watching, music playing and so on.
4. Cutier Car Dashboard Phone Holder Air Vent Mount 360 Degree Rotation Adjustable Mobile Clip Stand Suitable for 4-7 Inches Smartphones
Feature
- ▶Omnidirectional Viewing: 360-degree rotating design, feel free to adjust the holder to the best viewing .You can enjoy a boundless horizon while driving in road.
- ▶Safe Driving：The cell phone holder adopt HUD simulating design. you needn’t to look down at the screen, just be a eye-level then you can get a best view of the road, ensuring your safe driving while your are GPS or talking, navigating, listening to music or charging.
- ▶2 IN 1 Air Vent Phone Mount & Dashboard Car Phone Mount: The package include air vent phone mount base and dashboard car phone mount base, you could choose which car phone holder depending on your specific situation.
- ▶Easy to Install and Remove: The dashboard car phone mount adopt curved base design, One-hand control, easy to pick up and put back your phone with one hand. More convenient to operate your phone by single hand , easy to mount and remove your smart phone .The air vent car phone mount has a quick release button, simply clip to the air vent. And easily remove the mount from your car or your phone from the clip.
- ▶Protective Phone Clip and Broad Compatibility: The phone clip made with a soft,non-slip silicon pad, which could prevent the damage of scratch to your car and phone, and strengthen the stability of the mount. Our car phone mount width is up to 3.3 inches, suitable for most mobile device sized 4-7 inches. Such as iPhone X Max/8/8 plus/7/7plus/6s plus/6/5Se/5s/5/4s, Samsung galaxy Note8 ,S8plus, S7Edge, Nexus, Pixel, LG, Sony, HTC, IPAD ,Huawei, Xiaomi and other smartphones or GPS Devices.
Description
Specifications:
Material : ABS+ Silicone
Color: Black
Product size: 110*80mm/4.33*3.15″
Gross weight: 88g
✘Partial NOT work Vehicle models:
Honda: Civic, CRV, Odyssey, Pilot, Fit, HR-V
Hyundai: Tucson, i10, Sonata
Jeep
Infiniti: QX60
Land Rover: Discovery
Lexus: ES 350, NX,GS350
Mazda: Axela
Mercedes-Benz: CLA, G55, Vito, A200
Nissan: Frontier, Micra Acenta
Opel: Corsa 2016 Citroën: C3 2006
Porsche: Panamera
Renault: Kangoo 2, Clio 3 serie, clio 4
Seat: Toledo León Ibiza
Skoda: Octavia, Felicia 1.6
Sportage: Kia
Subaru: Crosstrek
Suzuki: Swift
Toyota: Camry,Corolla, Highlander,RAV4, Tundra, Yaris
Volkswagen: T5, Jetta
Volvo: V40, XC90
Package included:
1 x Dashboard car phone holder base
1 x Air vent clip phone holder base
1 x Adjustable phone clip
5. GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
Feature
- 4 Hole sizes from 6.3Mm(1/4″), 8mm(5/16″ ), 9mm(23/64″ ), 10mm(25/64″ ).
- 6 different Push pin rivet for many brand vehicles.
- Great material – these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- Widely application – these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
Description
Specification: material: black nylon, suitable for car Use better replacement for original old worn broken one. Push type, easy to fasten.
6. GOOACC Nylon Bumper Fastener Rivet Clips Automotive Furniture Assembly Expansion Screws Kit Auto Body Clips 8mm – 40PCS
Feature
- UNIVERSAL FIT: These universal push-type plastic clips will fit on most of auto parts with 8mm hole, hold your parts very tightly
- STURDY AND DURABLE: Made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
- MULTIPLE USE: Widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers
- PRODUCT SIZE: Head Diameter: 20mm/ 0.8 inches
- Stem Length: 22.8mm/0.9 inches
- Fits Into: 8mm /0.3 inches hole
- PACKAGE INCLUDE: 40PCS Fastener Rivet Clips
Description
Specification:
Material: Black Nylon, suitable for car use
Better replacement for original bumper and fender clips.
Push in type, easy to fasten Bumper Fender Flare and Mud Flap.
Rivet post pressure expands legs for fast and tight fastening
Application:
Car good accessory, commonly used for fitting side skirt, bumper, car fender, engine cover, door trim panel, interior trim panel and various trim panels
They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc.
7. BDK Universal Fit 4-Piece Set Metallic Design Car Floor Mat – Heavy Duty All Weather with Rubber Backing (Blue)
Description
Restyle your vehicle with new metallic diamond plate mats. Durable vinyl with anti color-fade scratch resistant finish. Protects original carpet against spills, stains, mud and debris. Feature a non-skid nib backing to keep mats in place. Universal shape to fit most cars, SUVs, trucks and vans. Content: 2pc front (27 x 19 inch.) And 2pc back mats (16 x 19.5 Inch).
8. 5” x 7” Car Sound Speaker (Pair) – Upgraded Blue Poly Injection Cone 3-Way 300 Watts w/ Non-fatiguing Butyl Rubber Surround 80 – 20Khz Frequency Response 4 Ohm & 1" ASV Voice Coil – Pyle PL573BL
Feature
- 80Hz – 20Khz FREQUENCY RESPONSE: Pyle, 5” x 7” three way sound speaker system has a 20 oz magnet structure, 1” neodymium film dome midrange and frequency response. This car speaker is pack with exceptional 90dB (1w/1m) decibel sensitivity
- 4-OHM IMPEDANCE: This car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. The blue poly injection cone also looks great and allows your music to resonate with full power
- 1” ASV VOICE COIL: Pyle car sound speaker system is capable of 1” high-temperature ASV voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures
- 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A set of one 5”x7” and one 6”x8”300-watt speakers both the high and low end for a fuller range sound
- LOUD AND CLEAR: Pyle car speaker were carefully combined to reproduce sound clearly with outstanding responsiveness. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product
- Poly-mica coated woofer cone
- 1″ neodymium film dome midrange
- 3/4 piezo tweeter
Description
Pyle Model : PL573BL
5” x 7” / 6” x 8”, 3-Way Speakers
5” x 7” / 6” x 8” 300 Watt Three-Way Speakers
Pyle’s Blue Label series speakers don’t just sound great – they look great, too. Feast your eyes upon the azure curves of Pyle’s Blue Label series and you’ll agree. They’re great replacements for your vehicle’s factory speakers – you’ll hear the difference immediately. Included in this package is a set: one 5’x 7′ and one 6′ x 8′, both three-way 300 watt speakers – carrying the high, mid, and low end for a fuller range sound. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product. A 1′ high-temperature ASV voice coil provides the richest sound, ensuring low distortion and providing an open sound stage. The blue poly injection cone looks great and allows your music to resonate with full power. The 20 oz. magnet structure, 1′ neodymium film dome midrange, and ¾’ piezo tweeter are what power these speakers and allow for a 80 Hz – 20 kHz frequency response. Includes grills, wires, and mounting hardware. Trust Pyle to provide quality sound at a competitive price.
9. GUB Bicycle & Motorcycle Phone Mount, Aluminum Alloy Bike Phone Holder with 360° Rotation Adjustable for iPhone X XR Xs 7s 8 Plus, Samsung S7/S6/Note5/4 GPS Mount 4 to 6.5 Inch (Black)
Feature
- ADJUSTABLE LENGTH – Compatible With Most Mobile Phones, GPS, you can adjust the width from 50mm to 100mm to fit the cell phone.Can hold 4 to 7 inch phones
- MORE STRONG – Aluminium Alloy Material with Sponge,The metal phone mount will hold your cell phone tightly on the bicycle，the Sponge also protect your cell phone.
- NEW DESIGN – Does not obscure the screen ,Perfect for almost all large screen phones. eg iphone x/Xr/xs,Huawei Mate 20 pro, samsung s8 Note9 full screen or all screen phone
- 360 DEGREE ROTATION – You can rotate the viewing angle at will no need to uninstall.
- WIDE USE – Can Installed on Φ31.8/25.4/22.2 handlebar. Can be used on Motorcycle/MTB/Road Bike/E-bike/Folding bike/scooter etc
10. Motor Trend OS274 Gray & Black AquaShield Car Seat Covers, Front – 3 Layer Waterproof Neoprene Material with Modern Sideless Design, Universal Fit for Auto Truck Van SUV
Feature
- PROTECTS AGAINST STAINS – These are the perfect seat covers for your new car, or even a car that’s just new-to-you. Our front seat covers offer protection against spills and stains that might occur inside of your vehicle while also refreshing the look of your interior.
- WATERPROOF LINING – Have peace of mind knowing that your seats are protected in the case of an accidental spill. We use a waterproof neoprene foam lining on the inside of our seat protectors for maximum protection against spills.
- MODERN DESIGN – Our universal fit seat covers feature a modern ‘side-less ‘design that is fully compatible with any built-in airbags and armrests found in newer vehicles. No modifications required, simply install and you’re all set!
- EASY TO INSTALL – The best investment for your new vehicle might also be the quickest. Follow our simple 3-step installation process to install the front seat covers before finishing off with the head rest covers.
- UNIVERSAL FIT – Our front seat covers are designed to fit most vehicles including cars, trucks, vans and SUVs. Please see our product images for fitment examples. Some additional work may be required to create a ‘perfect’ fit.
Description
The newest from Motor Trend: 3 layer waterproof car seat covers feature a soft polyester cloth outer layer with waterproof neoprene backing. Behind these layers is a patented non-slip backing which both reinforces and prevents tearing, while also keeping the cover in place and preventing slippage.
Conclusion
By our suggestions above, we hope that you can found Dash Rubber For Harley for you.Please don’t forget to share your experience by comment in this post. Thank you!
