Top 9 Cooling Stop Plug

Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;

Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)

Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual

Specifications:
Name: G1/4″ Plugs
Thread: G1/4″ Male Thread
Color: Black
Feature: With high quality sealed o-rings, can be either tightened by hand.

The plug can prevent oxidation and dust setting into liquid cooling gear.

Specifications:
Product Name : Stop Plug
Material: Brass,Silica Gel
Surface Treatment: Nickel Plating
Thread Size: G1/4 Inch
Diameter: 18 mm/0.71Inch
Color : Silver
Package Content : 4PCS Stop Plugs

Feature:
Made of brass, electroplated, smooth and beautiful, durable, and long life.
Each stop fitting includes a silicone seal to prevent water from flowing out.
Easy to use, line edge design can be tightened with coins.

EK-PLUG G1/4 Acetal – Black (10 pack) is a simple pack of ten black acetal G1/4″ plugs with o-rings. The plugs can be easily tightened with a one Euro coin or a similar sized coin. The set of plugs is useful to cap your liquid cooling hardware which you are storing for a longer period of time. The simple acetal plug will prevent dust setting into your liquid cooling gear and since its an airtight plug, it will also prevent oxidation.

This set can also be utilized to convert EK-RES X3 Series reservoirs (also X4), EK-D5 Series pump combo units and EK-DDC Series pump combo units to be compatible with EK Fluid Gaming aluminum parts, by swapping out the brass nickel plated plugs.

Made from black CNC machined acetal. Sealed with quality o-rings.

Technical data:

– Threading: G 1/4″
– Thread length: 4mm
– Diameter: 17mm
– Height: 2.7mm

Model: 3830046995735

Brand: Votono

Product Name: G1/4″ End Cap

Condition: 100% Brand New

Color: Black/Silver

Material: Nickel-plated Brass

Fixing Method: Hand Twisted

Surface Treatment: Electroplating

Thread Type: G1/4”

Connector:  G1/4″ diameter

Diameter: 18mm/0.71in (Approx.)

Height: 9mm/0.35in (Approx.)

Compatible CPU: Intel / AMD

Packing List:

4x G1/4″ Plug  (No retail package)

Features:

Water stop plug, water lock plug.

Electroplating processing and durable.

With this design you can use your hand to screw it.

Delicate appearance, mini size.

One of the best fitting for water cooling system.

Note: 

Metal G1/4″ plug may have few scratching on the surface. But it will not effect on its use.

K-Seal 8 fluid ounce bottle is effective to 20 quarts cooling capacity. Just shake, pour and go. It repairs leaks and cracks in radiator, head gasket, heater core, freeze plugs, water pump casing, cylinder heads and engine blocks.

XSPC plug fitting for water cooling systems with easy tool-free installation.

Model: TR-5060175587015-4P

The Pacific G1/4 Pressure Equalizer Stop Plug fitting is made for helping release excess air or pressure in your pump. Finished in chrome/black-plated copper, the G1/4 pressure equalizer plug is designed to install on the top of reservoir, and utilizes leak-free design with a preinstalled O-ring. Enjoy the ultimate in custom PC water cooling configurations with high quality components from Thermaltake.

IronBuddy 4 pack G1/4 stop fitting is made of brass material, electroplating processing, bright and beautiful appearance. The water stopper plug prefect for computer water cooling system, they will effectively prevent water from flowing out in water cooling system.

Materials: Brass.

Color: Sliver.

Thread Size: G1/4” (International General).

Package included: 4 Pcs G1/4″ Stop Fitting.