Finding your suitable readers for cooling fan dc is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling fan dc including detail information and customer reviews. Let’s find out which is your favorite one.
992 reviews analysed
1. GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
Feature
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
2. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
3. URBEST 90mm x 25mm DC 12V 2Pin Cooling Fan for Computer Case CPU Cooler
Description
Application to car seat, computer, electrical appliances, tools, machine, units, power supply, network equipment, office equipment, lighting, shoe ark, sanitary equipment children toys, supply of heat dissipation problems, reducing equipment working environment temperature, prolong the service life of equipment. The mounting screws are not included.
4. GDSTIME 2 Pack 80mm x 80mm x 25mm 12V DC Brushless Cooling Fan
Feature
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2Amp
- Rated Speed: 2800RPM
- Air flow: 43.6CFM
- Noise: 31dBA
- Power: 1.7Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Description
Package included: 2 Pieces 80mm x 25mm 12V Brushless Cooling fan
Rated Voltage: DC 12V; Rated Current: 0.2Amp
Rated Speed: 2800RPM; Air flow: 43.6CFM;
Noise: 31dBA; Power: 1.7Watt
Bearing Type: Sleeve Bearing
Life: working up to 35000h at 25 degrees.
Weight: 60g/pcs(2.12oz per one)
Cable Lenght: 300mm / 11.8in
5. GDSTIME 140mm x 38mm 12V Dual Ball Bearings Brushless Dc Cooling Fan
Feature
- Dimension of outer the frame is 140mm(L) x 140mm(W) x 38mm(H) / The size of fan in inch is 5.51in(L) x 5.51in(W) x 1.5in(H)
- Center to Center of hole distance is 125mm / 4.92in.
- There are two fan blades. one is actually fixed. It’s function is increase air pressure.
- Rated Voltage: DC 12V
- Rated Current: 1.5Amp
- Rated Speed: 3000 RPM
- Air flow: 223 CFM
- Noise: 46dBA
- Power: 17Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
6. GDSTIME 80mm x 80mm x 25mm 24V Brushless DC Cooling Fan
Feature
- Package include: 1 Piece fan include fan grill
- mounting screws & nuts
- Size: 80x80x25mm or 3.15×3.15×1 inches
- Weight: 50g/pcs
- Rated Power: DC 24V 0.1Amp
- Bearing type: Sleeve
- Speed: 2800RPM
- Air flow: 44CFM
- Noise: 27dBA
- Connecter: XH2.54-2Pin
- Cable Length: 20cm Or 7.9 inches
- With 7 blades,offer strong weed power fast cooling for your PC Computer and other electronic equipment.
- With metal protection grill to prevent the fan hurt your hand or damage cord when operating, good protection.
- RoHS compliance for protecting the environment
Description
Package include: 1pcs fan Dimensions: 80x80x25mm Connector:XH2.54-2Pin Rated Voltage: DC:24V Rated Current: 0.1 Amp Rated Speed: 2800 RPM Air flow: 44 CFM Noise: 27 dBA Bearing Type: Sleeve Life: 35000 hours Cable Lenght: 20cm or 7.8 inches Weight: 60g or 2.1 oz
7. MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Feature
- √. Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √. Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √. Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m³/ h
- Number of revolutions: 13200RPM.
- √. Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not only using them for Raspberry Pi but also for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √. Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
Description
2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm
8. 2packs 40mm x 40mm x 10mm 4010 12V 0.15A Brushless DC Cooling Fan 2pin AB4010M12 UL TUV
Description
Description : Model: AB4010M12 NAME:DC12V BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC10.8-13.2
Consuming Current : 0.11A(0.15 Max.)
Consuming Power: 1.32W(1.8 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6200 PRM
Iife Expectance: 70,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 25db***
DC Line Length : 100mm
Max. Air Flow: 6.86CFM
Rotation Direction: Clounter-clockwise
Size:40x40x10mm
Size:18g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
9. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Feature
- Oil bearing 30000 hours
- Double roller bearing 50000 hours
- Certification: CE,UL,CUL
- Temperature of usage environment: -10℃ to +70℃
- Bearing is high precision, long life and low noise
- Size: 40 mm x 40 mm x 10 mm
- Working Voltage: DC 12V
- Working Current: 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96w
- Cable length: 280mm
Description
4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;
Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise
Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan
Conclusion
By our suggestions above, we hope that you can found Cooling Fan Dc for you.Please don’t forget to share your experience by comment in this post. Thank you!
