984 reviews analysed
1. Cen-Tec Systems Vacuflo Turbocat Central Vacuum Air Turbine Brush, Gray
Feature
- No Batteries or additional power needed
- Runs off your Central Vacuum
- The make-up of the TurboCat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- This model is gray in color
2. Cen-Tec Systems 94775 CT20QD Quiet Drive Central Vacuum Nozzle with Integrated Wand, Black
Feature
- Suitable for use with all major brands of central vacuums, including: Beam, Electrolux, Eureka, VacuMaid, Vacu-flo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium with a flush mount hose
- Includes wand release, wrap around bumper, headlight, reset button and a height adjustment
- Quiet Drive poly-v belt is always in contact, which results in a dual brushed edge cleaning so no dirt escapes
- Can be used to replace a Nutone CT600
- Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces
- Has a four position height adjustment allows the brush agitator to be set to carpet conditions for optimum cleaning
- A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning
- The fully integrated telescopic electric wand connects the CT20QD to central vacuum and canister electric hoses with a flush plug position electrical connection.
3. Cen-Tec Systems 92927 Central Vacuum Power Nozzle Kit
Feature
- Central vacuum package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the nozzle from the hose handle
- The 14Wide power nozzle has a chevron agitator design shown to provide superior cleaning performance
- Compatible with all major brands of central vacuums including beam, Electrolux, eureka, vacumaid, vacuflo, nutone, cyclovac, canavac, husky, star power, md, and imperium
- 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle
- Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning
Description
The Cen-Tec 92927 central vacuum accessory package is designed to provide superior cleaning for today’s home with both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishing and we have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The universal hose end makes the 92927 compatible with all major brands of central vacuums including beam, ELECTROLUX, eureka, VacuMaid, Vacuflo, Nutone, Cyclovac, Canavac, husky, star power, Md, and imperium brands. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance. The quiet Drive poly-V Drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft Bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.
4. Cen-Tec Systems 93059 Central Vacuum Kit with Switch Control 50′ Hose, 50 Ft
Feature
- Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: beam, Electrolux, vacuflo, vacumaid, nutone, hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50 Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles
- One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
Description
The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
5. HP Products 9880 Dirt Devil Central Vacuum System
6. ANTOBLE 2 Pcs Standard Central Vacuum Inlet Valve Plate White for Beam Central Vac – White Round Door
Feature
- Includes 2 Central Vac White Inlet Valve Round Door Covers. (Non-OEM)
- White Standard Inlet Valve features a Round Door. Fits Beam central vac units.
- For new and existing low voltage construction applications. Easy installation.
- Most Common inlet valves used.
- Inlet opening measures 1.5″ and has 2 electrical contacts inside the port.
Description
The package will include 2 Universal style inlet valves. These are the most common inlet valves used in central vacuum system today. Inlet opening measures 1.5″ and has 2 small contacts inside the port (as seen in picture).
7. Royal Central Vacuum Cleaner Filter Part 8106-01
Description
Works With: Royal 8106-01 Description:7″ Corrugated Filter 83-2335-04 RO-810601
8. 6 Pack of HAYDEN Central Vacuum Wall Inlets – White Square Door 1700-01 Vac Hose Outlet
9. Broan-NuTone CT150B Deluxe Combination Floor/Rug Tool Central Vacuum Hose Attachment
10. 12in Deluxe Central Vacuum Accessory Floor Brush
Feature
- Deluxe 12 Inch Wide Natural Bristle Deluxe Bare Floor Brush Fits Most Central Vacuum Systems
- Fits all Vacuums Which Use a 1.25″ Diameter Hose or Wand
- Natural Horse Hair Bristle Brush Cleans Even the Most Delicate Smooth Floors Without Scratching Them
- 90 Degree Swivel Neck Allows Cleaning in Tight Areas, Under Furniture Simple
Description
This premium 12 inch wide natural bristle bare surface floor brush is ideal for vacuuming all types of bare surface floors, including marble, hardwood, tile, linoleum, laminate, parquet, and can even clean low pile rugs. The bristles are made from natural horse hair which provides a very soft brush which will not scratch even high gloss floors such as marble. The 90 degree swivel neck makes maneuvering around furniture, or underneath tables incredibly easy. The diameter of the swivel neck measures 1.25″, which will fit nearly every central vacuum system on the market, including; NuTone, Beam, VacuFlo, Hayden, CenTec, Electrolux, Dirt Devil, Hoover, MD Manufacturing, and many others. It also works with many stand alone vacuum cleaners such as Dyson, Hoover, Bissell, Eureka, and all other brands which use a 1.25″ diameter hose or wand. Risk free money back guarantee on size, fit and quality.
Conclusion
By our suggestions above, we hope that you can found Central Vacuum Y for you.Please don’t forget to share your experience by comment in this post. Thank you!