Nowadays, there are so many products of amplifier board full range bluetooth in the market and you are wondering to choose a best one.You have searched for amplifier board full range bluetooth in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings amplifier board full range bluetooth which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
537 reviews analysed
1. AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board DIY (Bluetooth Amp with Case)
Feature
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz – 20 KHZ, output: 20 hz – 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
- Audio input sensitivity: 500 mv
- Speaker impedance: bass speaker impedance: 2-8 ohm
- You can use a good switching power supply adapter, laptop switching power supply, Here is the 24V power supply link:https://amzn.to/2lVNx57
2. DAMGOO Bluetooth 5.0 Amplifier Board,100w Audio Amp Board Dual Channel DC8-24V,Easy Installation and Password Free Connect to Phone Quietly
Feature
- CHIP: TPA3116D2 (with AM interference suppression function), 50W*2 output power With filter
- WIDE INPUT VOLTAGE: DC 5V-27V, Can Be Powered by 9V/12V/15V/18V/24V
- TWO AUDIO INPUT WAYS:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
- PROTECTIVE FUNCTION:This BT Amp Is Designed with Protective Case, Reverse Connection protection, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
- NO POP SOUND: There Is no POP Sound When Powering this Module, Skipping Song or Pausing.
3. Douk Audio TPA3116 2.1 50WX2+100W+ Bluetooth Class D Power Amplifier Completed Board New
Feature
- 100% brand new and high quality. Using original TPA3116 and CSR4.0 Bluetooth module
- Coupling capacitance by Germany’s Siemens 1UF. Signal main circuit electrolytic capacitors used in Taiwan brand, the main filter capacitor electrolytic capacitors imported from Japan to ensure strong support for a steady stream of power.
- Resistance selection Rings metal resistance, the main circuit employs a precision of ± 1% metal film resistors rings, ensure the machine a good signal to noise ratio.PCB using 1.6mm thick double-sided sheet, 2.0 oz copper thickness, HASL whole process to ensure that the size of the current through the good performance. PCB-class quality.
- Fully enclosed dust-proof potentiometer, the performance is more stable, more durable than ordinary potentiometer!All-shielded audio-specific high-current inductors, to ensure crisp and powerful sound.
- Using the latest Bluetooth version 4.0.Mode Bluetooth connection mode and common equipment like!
Description
Parameters :
Work modle: class D
Quiescent current: 60mA
Work efficiency: 90%
Rated output power: 100W+2*50W
Frequency response: 20Hz to 20KHz
Working voltage: DC18V to DC24V
Maximum output current: 3A
PCB SIZE：(L*W)10.4*10.3cm/4.09″*4.06″
Input mode: only bluetooth input function.
Potentiometer distance : 22MM 22MM 30MM
Quantity:1Pc
Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
4. Pyle Auto 4-Channel Bridgeable Marine Amplifier – 200 Watt RMS 4 OHM Full Range Stereo with Wireless Bluetooth & Powerful Prime Speaker – High Crossover HD Music Audio Multi Channel System PLMRMB4CW
Feature
- WIRELESS BLUETOOTH CONNECT: This bluetooth is built in with 2.0 version and with the wide range that could reach up to 30’ + feet even on underwater. It has power protection circuitry and electronic high crossover network that bridge variety channel
- COMPACT AND POWERFUL: This bridgeable multi-channel amp is prime class and slim pack with 4×100 Watts RMS @ 4Ohm, 4x 200Watt MAX @ 4Ohm and 4×300 Watt RMS @ 2 Ohm and has wire auxiliary RCA audio connection and integrated cable for easy installation
- WORKS TO ALL DEVICES: This powerful multi 4-channel marine and car amplifier can immediately connect to all of your favorite gadgets such phone, ipod, iphone, android, tablet and can be used for boat or aquatic vehicle application or in your home
- WEATHERPROOF WATER RESISTANT DESIGN: This extremely efficient, 4channel, 200w outdoor amp is fully marinized with a waterproof and rust resistant coating on the PCB and mechanical casing. Truly, lives the one and only legacy of an auto amplifier
- INCOMPARABLE SPEAKER: This latest 200watt 4 channel subwoofer amplifier takes your small vehicle’s no filter music audio system to the next level. It is install with full HD sound, bass control and LED lights indicator that your stereo is working
Description
Pyle 4 channel Marine Amplifier has an incredible sound and lots of power without the distortion. It could run for hours and it will still be cool and soft to the touch in on/off button. You’ll love the sound’s purity and clarity. Wire the front channels to increase the output power from 70 watts to 200 watts per channel. Try the 4 full-range channel and enjoy the powerful sounds that come from a sleek amp. The full-range is the perfect solution for anyone seeking excellence on the open water. Capable of powering multiple sets of component, pro audio, or coaxial speakers, it packs the power that will allow your speakers to come alive. Versatility is this amplifier’s middle name, with an array of adjustable user controls such as the gain, LPF, HPF, crossover, and bass eq. Featuring a high-speed power supply, advanced electronics, and other internal high quality components. It shines when compared to anything in its class when it comes to power and reliability. The class A/B circuitry equipped in this amplifier allow it to reproduce extremely clean output, for the best possible sound on your boat or in your vehicle. Moreover, this extremely efficient, 4channel, 200w outdoor amp is fully marinized with a waterproof and rust resistant coating on the PCB and mechanical casing. Truly, lives the one and only legacy of an auto amplifier. System Features: Compact & Powerful Marine Amplifier Universal Design for Stereo System Portability Built-in Bluetooth Wireless Music Streaming Weatherproof & Water Resistant Design Marine Grade Construction Integrated Cables & Wires for Easy Installation Setup Wired Aux (RCA) Audio Connection Ability to Connect & Stream Audio from External Devices Perfect for Custom Speaker Powering Electronic Crossover Network Anti-Thump Turn-On Soft Turn On / Off LED Indicator Light Power Protection Circuitry Mounting Brackets for Convenient Placement Used for Mobile, Boat and Aquatic Vehicle Applications Wireless Bluetooth Connectivity: Simple Device Setup and Hassle-Free Audio Streaming Works with All of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.) Bluetooth Network Name: ‘Pyle Amplifier’ Wireless Range: 30’+ Feet Bluetooth Version: 2.0 What’s in the Box: 4-Ch. Marine Amplifier Waterproof Smartphone/Device Bag Smartphone/Device Audio Connection Cable Wired Volume Control Unit Technical Specs: 4 x 100 Watts RMS @ 4 Ohm 4 x 200 Watts MAX @ 4 Ohm 4 x 300 Watts RMS @ 2 Ohm Waterproof Marine Grade Rating: IP-65 2 Ohm Stereo Stable T.H.D: 0.05% S/N Ratio: > 95 dB Channel Separation: > 65 dB Frequency Response: 10-40 kHz Fuse: 10A Power: DC 12V Amplifier Dimensions (L x W x H): 6.1’’ x 3.4’’ x 1.4’’ Sold as: 1 Weight: 2.3 lbs.
5. Aideepen TDA7492P 50W+50W Audio Power Bluetooth Amplifier Board Dual Channel Wireless Digital Stereo Receiver AMP Board with 5.5×2.1mm 12V 2A AC Adapter and 1pair Male Female Jack Connector
Feature
- POWERFUL 2x50W: Aideepen’s 2 Channel Stereo Amplifier Board will let you enjoy wonderful quality stereo music and audio w/2x50W watts of power which can be used for multi speakers w/ 8 ohms impedance. Perfect for your for home or vehicle music streaming sound system
- Upgraded Version: Model: AD-001, with better quality capacitor resistance, the sound is more stereo
- Better performance heat dissipation
- 4 mounting holes are made of gold-plated material, which is more beautiful. Blue and red optional. Equipped with Bluetooth wireless music streaming, the personal integrated digital audio receiver works w/ today’s phone devices with hassle-free receiver pairing
- Attached 12V 2A AC Adapter: AC110-240V worldwide input voltage, more convenient to connect your home audio device. Please verify carefully that the DC Output (12V 2A) and connector Tip size 5.5×2.1mm match your original adapter before purchasing
- Attached 1 pair 5.5×2.1mm plug connector: Female Jack-5.5mm x 2.1mm, Easier for camera installation, save time and more securer cable connection. Male jack–2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal, convenient for you to connect your amplifier board, led strip light, tape light or other devices
- Package Included: 1 x Aideepen Amplifier Board
- 1 x AC Adapter, 1pair Male Female Jack Connector. Plus, 6 month extended warranty and 24/7 friendly customer service
6. Aideepen 50W + 50W TDA7492P 2×50 Watt Dual Channel Amplifier Wireless Digital Bluetooth 4.0 Audio Receiver Amplifier Board (Red)
Feature
- POWERFUL 2x50W: Aideepen’s 2 Channel Stereo Amplifier Board will let you enjoy wonderful quality stereo music and audio w/2x50W watts of power which can be used for multi speakers w/ 8 ohms impedance. Perfect for your for home or vehicle music streaming sound system
- Upgrated Version: Model: AD-001, with better quality capacitor resistance, the sound is more stereo
- Better performance heat dissipation
- 4 mounting holes are made of gold-plated material, which is more beautiful. Blue and red optional
- BLUETOOTH CONNECTIVITY: Equipped with Bluetooth wireless music streaming, the personal integrated digital audio receiver works w/ today’s phone devices with hassle-free receiver pairing. Note: The device is only for your phone, you couldn’t use it for computer
- Board Button: The professional compact mini speaker sound amplifier board features crisp and responsive buttons for power interface, previous, next, play/pause. volume+, volume-, there is a Bluetooth indicator, when you see the red and blue alternately flashes you can be paired
- Small Size with Big Sound: This amp with two high efficiency drivers easily can reach 110-120 db, deeper sound experience. Plus, 6 month extended warranty and 24/7 friendly customer service
7. Facmogu F900 Red Bluetooth Amplifier with Adapter 5A 12V DC, 50W + 50W Mini Amplifier Wireless Audio 12V DC AMP 100W 2 Channel
Feature
- 50W+50W DUAL CHANNEL: F900 bluetooth receiver amplifier provides 50W+50W dual channel stereo output with the upgraded chip TPA3116.
- THREE INPUT OPTIONAL: Supporting AUX/ USB/ Bluetooth input. But the amp module can be searched and connected via Bluetooth when unplugging audio input line. Insert audio input line, then it will auto switch to wired input mode, Bluetooth function will be lost.
- SUPER COMPATIBILITY: Our Bluetooth audio transmitter can be widely applied to various tablet PC, TV, smartphone, Laptop with Bluetooth, iPhone and etc, versatile and simple to use. But it does not apply to a range of products launched by Amazon such as Echo, Alexa ect. and Bose Speakers.
- MINI ELEGANT SIZE BUT POWERFUL: Ultra small size (3*2.7*1.5 inch) with metallic colourful shell, advanced technology and chip, our Bluetooth stereo amplifier has good sound quality, no distortion, no humming or hissing and sounds clear, crisp.
- 1-YEAR WARRANTY: The package includes 1pc bluetooth amplifier, 1pc audio signal cable(3.9ft), 1pc AV audio signal cable(4.9ft), and 1pc 12V 5A US-type power supply. If you have any questions & concerns, please don’t hesitate to contact us.
Description
Amplifier Specifications:
Model: F900
Bluetooth Connection Distance: 10M
Bluetooth Standard Protocol: Bluetooth 4.0 + EDR
Rated Power: 50W + 50W
Input Interface: Bluetooth, USB sound card, AUX
Amplifier Chip: TPA3116
Power Input: DC 9V-24V
Product Size: 85 * 77 * 38mm
Net Weight: 105g
Power Supply:
Input Voltage: 100V-240V
Output: 12V 5A
Interface Specification: 5.5mm * 2.5mm
With overvoltage, overcurrent, short circuit protection
Package Includes:
1x F900 Amplifier
1x US Plug Power Adapter
1x Audio Signal Cable
1x AV Audio Signal Cable
8. DAMGOO Bluetooth Amplifier Board,50w+50w 2 Channel Audio Amplifier Board Suitable for retrofit Speakers Bluetooth Speakers,Easy Installation and Password Free Connect to Phone with Protective Shell
Feature
- -Wide Input Voltage Range: DC 4.5V-27V, can be powered by 12v or 24v, output power is 50Wx2. Two Powering Methods,the digital amplifier module is equipped with wiring blocks and DC 2.1mm socket which is compatible with most laptop’s power port.
- -4-8Ω speakers are highly recommended for this DAMGOO digital amplifier.
- -Two Audio Input Ways : User can directly connect with wireless Bluetooth 3.0/4.0/4.1, or choose the headphone (Line in) way.
- -Protective Function: This audio amplilifer board is designed with acrylic protective shell, reverse connection protection, over-voltage protection, under-voltage protection, over-heat protection, short-circuit protection.
- -No POP Sound: there is no POP sound when powering this module, skipping song or pausing.
9. YEMIUGO Bluetooth 5.0 Amplifier Board 100W Power High Fidelity HiFi Dual Channel Stereo Bluetooth Digital AUX Audio Amp Module with LC Filter
Feature
- ????【High Fidelity HIFI Sound】Adopt imported TPA3116D2 chips, with excellent power amplifier effect. the distortion is less than 0.1% even at high power output. modulation frequency up to 1.2MHZ， built-in LC filter capacitor to make the vocals clearer. Best choice for fancier
- ????【AUX & Bluetooth Input】With two audio source input methods, choose Bluetooth 5.0 connect or Headphone（AUX）input. Bluetooth transmission distance is 15 meters.it apply for speaker modified, car Bluetooth device and so on
- ????【Dual Channel】This audio amplifier module has dual-channel Stereo works with 4/8 ohm 50W-300W speakers. Please note that enough input voltage and current is necessary to make sure enough output power.
- ????【Protect Function】This BT Amp with protective shell, Support reverse connection protection, Over-voltage protection, under-voltage protection, Over-heat protection, Short-circuit protection
- ????【Parameters】Work Voltage: DC 5V-27V, Output Impedance: 4ohm~8ohm, Speaker Match:50W~300W, Work Temperature:-40℃~85℃, Work Humidity:0%~95%RH,Module Size(Installed):106*52*24mm
Description
YEMIUGO high-power stereo Bluetooth audio module with Dual channels audio signal output and built-in LC filter capacitor, it can connect to the loudspeaker directly. It is ideal for wireless Bluetooth speakers and transponders.
Advantage:
❤Width work voltage range
❤Applicable multiple type speakers
❤Knob adjustment
❤Potentiometer support switch function
❤Support short circuit protection
❤Support over-voltage protection
❤Support under-voltage protection
❤Support over-temperature protection
❤Dual stereo output
❤Support AUX audio input
❤Built-in filter capacitor
Output Power:
Output power 24W*2 at 12V 8ohm
Output power 40W*2 at 12V 4ohm
Output power 36W*2 at 15V 8ohm
Output power 60W*2 at 15V 4ohm
Output power 64W*2 at 19V 8ohm
Output power 92W*2 at 19V 4ohm
Output power 110W*2 at 24V 4ohm
Note:
????The power amplifier board should be as far away as possible from the WIFI signal (router) to avoid signal interference.
????Recommended power supply voltage DC 5~27V. The module will be damaged if input voltage is more than 27V.
????Please don’t use too long wires to avoid signal interference.
????Please read user manual and description before use.
10. DAMGOO Bluetooth 50W+50W Stereo Audio Amplifier Board with Treble and Bass Control, Bluetooth and AUX Inputs, BT 5.0 AMP Board for DIY Wireless Speakers Board, Easy Installation and Password Free
Feature
- TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 9-24V
- Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.；
- Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.；
- Safety Protection: This Amp Board Has Overheat Protection, Circuit Protection, Over-voltage and Under-voltage Protection；
- 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.
Conclusion
By our suggestions above, we hope that you can found Amplifier Board Full Range Bluetooth for you.Please don’t forget to share your experience by comment in this post. Thank you!
