929 reviews analysed
1. UltraSource Stainless Steel Heating Element w/ Dial, 1500 W
Heating elements from UltraSource provide controlled heat for proper knife sterilization.
2. Camco5" Residential Screw-In Water Heater Element Wrench – Fits All Standard Screw In Elements (09883)
- 5″ long Zinc plated water heater element wrench
- Compatible with all standard screw-in elements and 1-1/2″ hex on residential screw-in water heater elements
- Cross holes allow you to use a screwdriver for enhanced torque and to help remove and install element with ease
- Fits into offsets where an adjustable wrench can’t
- For use with residential water heaters
3. Camco 02202/02203 2000W 120V Screw-In Water Heater Element – High Watt Density
4. Kingwork UL-Listed Bucket Heater, 1000 Watts Immersion Bucket Water Heater with Thermostat and Electric Immersion Heating Element, Submersible Water Heater with Auto Shutoff
- Applications – This Kingwork heavy duty and portable bucket water heater heats water only. Use for cold weather and travel. Perfect for winter time jobs.
- Thermostat Feature – The silver-colored stainless steel tube contains a thermal overload safety switch, it can automatically cycle on and off as needed to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The heater is safe for use in all pails, buckets and bathtubs, make sure the container designed to contain boiling water.
- Simple Operation – Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure unit is on. It will heat water continuously over 180 degrees F and towards boiling.
- UL-Listed to the safety standards, Package included: 1 pack bucket heater + Manual.
– The Kingwork bucket heater designed to heat water only. Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather.
– Bucket Water Heater is only to be immersed up to the point of the electrical connection. Water level about 8” deep.
– The size of this electric immersion heater is perfect rested in 5 gallon bucket.
– Handle and cord cannot be submerged.
– The bucket heater is safe for use in all pails, buckets and bathtubs, will not damage plastic containers, make sure the container designed to contain boiling water.
– 1000W 120V
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
5. Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
6. Stanbroil Replacement Part Electric Smoker and Grill Heating Element with Adjustable Thermostat Cord Controller
- Made from premium materials, this heating element was designed to last.
- 1500W, 110V Heating Element with adjustable mounting bracket and element support feet.
- The heating element and matching adjustable controller allows you to adjust the temperature from approximately 50 F up to 450 F.
- The heating element can easy mount flange which requires a rectangular opening in the side of your grill or smoker.
- Built in Controller Heating On indicator light.
7. Farm Innovators W-409 1000W Submergible Bucket Heater with Attached Guard
- Designed to heat 5 gallons of water quickly and efficiently
- Thermostatically controlled to maintain water temp approximately 100°-110°F (38-43°C)
- Low profile design rests easily in the bottom of any bucket or container
- Constructed of cast aluminum for durability and reliability
- UL listed with 6′ power cord
Designed to heat 5 gallons of water up to approximately 110 degrees. Thermostatically controlled to regulate the water temperature between 100 and 110 degrees. The low profile design rests easily in the bottom of any bucket or container. Constructed of cast aluminum for durability and reliability. 6-foot cord. UL approved, made in USA.
8. Unifit 120V AC 15A Electric Smoker/Grill Analog Temperature Controller Heating Element Replacement Kits up to 1750 Watts (2)
- Fits Smoke Hollow,Masterbuilt,Char Broil,Cuisinart analog control electric smokers
- 120V AC 15A temperature controller with 14 AWG power cord
- Temperature adjusting range from 100F to 550F,depends on your appliance size
- 120V AC 1650 Watts high heat efficiency heating element
- UL certified heat element and CSA certified controller
Universal analog temperature controller with 1650 Watts heating element kit set fits most electric smoker and electric grill in the market: Smoke Hollow, Masterbuilt, Char Broil, Cuisinart
9. BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed
- ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
- ✓ Century to BN-LINK: Your product might come in the brand of BN-LINK or Century as we are currently rebranding to BN-LINK. Please be assured that the quality remains the same.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
10. Dual voltage 300 to 1300 Watt 110V Black Travel Kit Great for Heating Boiling Chocolate Coffee Tea Drinking Water Heater Immersion Portable Boiler stainless steel Element Coil USA to Europe A
- HIGH QUALITY— Made of high quality stainless stain. Takes 1-2 minutes to heat water for tea or coffee!!
- SPECIFICATIONS — Heating element is at 6.3 inches and cable length at 32.5 inches. Always remove the plug of the immersion heater before and after use to avoid breakage. Comes with USA TO EUROPE ADAPTER!!!
- PORTABLE — Lightweight, portable and ergonomic ideal for office use or travel. . Great for travelers
- EASE OF USE — For best results used with glass, ceramic or stainless steel containers only. Just plug into the wall socket and your set to go!!!
- 100% MONEY BACK GUARANTEE — Here at Isource, we believe in our product and offer 100%, money back guarantees.
Portable heater for warming coffee, tea, soup, and more. A perfect travel companion. Ideal for home, office or travel. Comes with Europe to USA adapter!
By our suggestions above, we hope that you can found Adjustable Water Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!