Top 9 Kenmore Elite Oven Vent Grille

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.

HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!

24″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75″ Width X 13.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.

How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

12″ X 24″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face -White [Outer Dimensions: 13.75w X 25.75h]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″ thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 1.75, listed height + 1.75″.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.”

Rocky Mountain Goods Air Return Grille is a heavy duty premium designed wall vent cover made to last the life of your house. With the complete installation kit, this air return register can be easily installed in seconds. For knowing the correct size we recommend measuring your duct and selecting the air return grille with the matching measurements. The attractive louvered design also ensures more consistent airflow throughout your house. The matte design is a premium finish but can also be used to paint if a different color is desired. Rocky Mountain Goods Air Return Grille comes with a lifetime warranty.

14″ X 20″ Return Air Filter Grille * Filter Included * – Removable Face/Door – HVAC VENT DUCT COVER – White [Outer Dimensions: 15.75w X 21.75h]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter – INCLUDED.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

16″ X 20 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 18.5 X 21.75]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

14″ X 24 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

24″ X 14 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 26.5 X 15.75]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.