We spent many hours on research to finding custom water cooling tool kit, reading product features, product specifications for this guide. For those of you who wish to the best custom water cooling tool kit, you should not miss this article. custom water cooling tool kit coming in a variety of types but also different price range. The following is the top 9 custom water cooling tool kit by our suggestions
630 reviews analysed
1. Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
Feature
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
2. Bewinner 16mm Tube Bending Kit, 3pcs 16mm OD 45/90 /180 Degree Acrylic Hard Rigid Tube Bender Mould Tool Kit,Suitable for Water Cooling System
Feature
- Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three.
- Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning.
- 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees.
- High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold.
- Need enough heat to bend (such as a heat gun).
Description
Features:
Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three. Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning. 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees. High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold. Need enough heat to bend (such as a heat gun).
Specification:
Material: ABS
Color: Black
OD: 16mm / 0.63inch
Size: approx. 9.2 * 7.1 * 2.1cm / 3.62 * 2.8 * 0.83inch
Package list:
3 * Rigid Tube Bender Mould
3. Thermaltake Pacific DIY LCS 1000mm Lengths V-Tubler PETG Hard Tubing (4-Pack) OD 16mm (5/8") x ID 12mm (1/2") CL-W116-PL16TR-A
Description
Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.
Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.
- Material: PETG
- Inside Diameter: 12 mm
- Outside Diameter: 16 mm (5/8”)
- Length: 100 cm *4
- Color: Transparent
4. Alphacool 29119 Silicon Bending Insert 30cm for ID 3/8" / 10mm Hard Tubes – Blue Water Cooling Tools
Description
For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed. Available for HardTubes with 10mm and 12mm inner diameter in each 30cm length for curves in short pipes and 100cm length for curves in longer pipes. Technical Data Length: 30cm Thickness: 9.2mm Color: blue Scope of delivery 1x Alphacool Silicon Insert 30cm Notice Due to the manufacturing process, the diameter can vary by 0.5 – 1mm.
5. Alphacool 29115 Acrylic Tubing Pipe Reamer – Light Version Water Cooling Tools
Description
The Alphacool deburring tool has three sharp edges, with steel blades to deburr cut HardTube from the inside and remove rough sections. On the other side of the tool are the steel blades to deburr the cut outside edge of the HardTube. Making a perfect seal with your connectors. Technical Details: Dimensions (HxD): 41 x 46,3mm Material: Plastic Color: red Scope of delivery: 1x Alphacool Acrylic Tubing Pipe Reamer – Light Version
6. Barrow G1/4" to 16mm Hard Tubing Compression Fitting (for Use with Barrow Rigid Tubing Only), Silver Shiny, 4-Pack
Description
Barrow G1/4″ to 16mm Hard Tubing Compression Fitting, Silver Shiny
Model: TR-TYKN-K16 V4-4P
7. DIY Water Cooling PETG Hard Tube Bending Kit for 16mm OD Rigid Tubing Hose
Feature
- DIY bending tools for 16mm OD PETG rigid tubings / hose.
- Includes Mandrels for 45/90/180 degree bends
- Silicone rod insert prevents kinks and to help promoting smooth bends while keeping inner wall diameter
- Recommended to use soapy water assists with tube insertion and tube heating.
- Pre-drilled holes allow easy mounting of mandrels to flat surface
Description
This bending tools offered by Bykski are especially designed for ID 1/2” (12mm) x OD 5/8” (16mm) hard tube and provide everything makers needed when considering loop planning.
Available in various angles, the mandrels are made from ABS plastic and are anodized for maximum durability. Bending angles can be chosen from 45°, 90°, and 180°.
In addition, the cutter and reamer guarantee a clean and precise cut by eliminating all the hassles during the modding process.
Kit Contains
45° Mandrels x 1
90° Mandrels x 1
180° Mandrels x 1
Cutter x 1
Silicone cord x 1
Inside-outside Reamer x 1
8. Alphacool 29126 Silicon Bending Insert 100cm for ID 1/2" / 13mm Hard Tubes – Blue Water Cooling Tools
Description
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 100cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 100cm for ID 1/2” / 13mm HardTubes – blue Notice Due to the manufacturing process, the diameter can vary by 0.5 – 1mm.
9. XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing
Feature
- Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
- PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing)
- Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm)
- PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
- PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
Description
XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.
Conclusion
By our suggestions above, we hope that you can found Custom Water Cooling Tool Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
