Finding your suitable readers for 6 hp outboard motor long axis is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 6 hp outboard motor long axis including detail information and customer reviews. Let’s find out which is your favorite one.
735 reviews analysed
1. HANGKAI 3.5HP 2 Stroke Heavy Duty Outboard Motor Boat Engine w/Water Cooling System
Feature
- Features 360 degree steering rotation for reverse without gear shifting
- Standard CDI ignition system for easy starting and improved performance
- Superior engine water cooling system for improved engine performance
- Durable cast aluminum construction for superior corrosion protection
- Start-In-Gear protection/clutch feature prohibits prop rotation while idling
Description
Technical Data:
Overall length: 92CM
Overall width: 36.5cm
Overall height: 22cm
Transom height: 42cm
Full throttle perating range: 4000-5000r/min
Maximum output: 2.5kw(3.5HP)
Speed: 20km/h(four people)
Type: 2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark: 7-1/45-A(inch)
The engine and the propeller ratio: 2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 30:1
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
How to start the engine
(1) Plug the emergency turn-off cable plate in the switch groove.
(2) Plug the oil inlet plug for transferring fuel in the Fuel tank socket.
(3) Plug the oil outlet plug in the tubing socket of motor’s bottom.
(4) Spin and loose the venting screw in the fuel tank cap in a counter clockwise direction.
(5) Extrude the pump a few times until the area is full with fuel and the pump goes hard.
(6) Pull shift handle to neutral position.
(7) Turn throttle handle to “start” .
(8) When the engine cooled,puII out the choke valve to increase the concentration of combustible mixture gas and be more convenient and easier to start.
(9) PuII the starting handle, untiI the initiator of the claw and the flywheel plate mesh.
(10) After the engine runs,idle operate it for 2 to 3 minutes to warm up,then pull all the choke valve to the initial position.
(11) After the engine runs, check cooled water stablely flows or not. If there’s no water or stable flowing, turn off the engine and seek for the reason.
(12) During running, hang up the turn-off rope in your wrist or belt to ensure sailing safety.
2. DOMINTY 6HP 4 Stroke Heavy Duty Outboard Motor Boat Engine w/Air Cooling System
Feature
- Durable—-Economical and compact structure. Durable and lightweight ,Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
- 360° Steering Rotation—-Features a 360° steering rotation.
- construction. Maneuverable and safe twist grip throttle control.
- Suitable for: Freshwater and saltwater
- transistor non-contact electronic ignition for easy starting and improved performance.
Description
NOTE:
1. Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don’t mix the gasoline with engine oil.
2. The motor couldn’t reach the reverse gear.
3. The propeller and the bottom shaft not installed onto the motor when you receive. It’s easy to have them installed.
Specifications:
Model:vertical axis.single cylinder.air cool.four stroke.hand pull
Max. Output: 6.0HP
Stroke: 4-stroke
Bore and stroke: 70x45mm
Displacement(ml): 173
Compression ratio: 7.8:1
Max power : 3.2KW/3600rpm
Max torque: 9N.m/2500rpm
Ignition system: transistor non-contact electronic ignition
Startup model: hand pull
Noise exhaust method: muffler out machine and emission directly
Outboard model: spline drivehard shaft?spiral bevel gear
Steering: vertical axis, counterclockwise
Installation method: fix racks or intensify bracket
Propeller configuration counterclockwise: three blade or two blade anti-wind
Trim and tilt system :manual tilt
Transmission system:centrifugal clutch
Lubrication method: splash
Lubricating oil: standard hyperboloid gear oil
Reduction ratio:22:15
Built-in fuel tank volume:1.0L
Oil(engine oil) tank volume:0.6L
Packing dimension: 96 x 50 x 38cm
Weight: 29.0kg
Pay attention not to test the motor on the ashore but in the water.
3. 2 Stroke 3.6HP Outboard Motor Durable Corrosion-proof Boat Motor Fuel Efficient Boat Engine Brushless Motor Tiller Control Outboard Boat Engine for Inflatable Kayaks,Fishing Boats,Sailboats CDI System
Feature
- 2 STROKE & 3.6 HP:Outboard Motor has strong and stable power.Air cooling technology is perfect to avoid overheating, eliminates the pump section, motor reliability is improved greatly.
- EASY OPERATION: Outboard Motor has CDI system, is very easy to manual start , it can be partially tilted upwards to sail in shallow water.Can work in most water depth conditions, and motor features 360 degree steering rotation for reverse without gear shifting.
- ENVIRONMENTAL & FUEL-EFFICIENT:The advanced fuel saving technology make the gasoline consumption is efficient. Burning Oil will not Into the Water.Through the prop exhaust outlet for decreased noise and pollutant .
- DURABLE & CORROSION-PROOF:Full body of Outboard Motor is corrosion resistant, and an extra propeller is spare, which allows the motor for a long term use in freshwater and saltwater. It is better to start in fresh water for a while, to flush away salt and dirt.
- APPLICATION RANGE: Compact structure, light weight, easy to carry, combined with avant-garde and neutral design.Perfectly adapted to math inflatable kayaks,fishing boats,sailboats and canoes.
Description
NOTE:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
5.There are two pull starter included in the parcel(one is the machine, another one for spare).We don’t supply wearing parts (pull starter)for free.
Don’t do the following will avoid cylinder Scoring:
1.Start the motor on bank.
2.Use the motor when it stop coming out of water.
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
After in the sea water or turbid water cruising:
1.Use the fresh water cleaning the outboard motor.
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don’t put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,from that will cause the engine breakdown.
4. EWANYO 6HP Outboard Motor 4 Stroke Heavy Duty Outboard Motor Boat Engine w/Air Cooling System
Feature
- Stroke: 4-stroke
- Max. Output: 6.0HP
- Max power : 3.2KW/3600rpm. Startup model: hand pull/electric start. Durable cast aluminum construction for superior corrosion protection.
- The new version 4 stroke 6 HP motor components have been fully upgraded and the unique Air cooling technology greatly enhances the engine performance.cooperated our upgraded air filter and the firm aluminum alloy propeller,make the engine more durable and more powerful.Features 360 degree steering rotation for reverse without gear shifting.
- Standard CDI ignition system for easy starting and improved performance.Compact Design, Portable and Light Weight Boat Motor. Start up performance is superior, easy to start, regardless of winter, summer, a success, more than any of the existing products in the market start-up performance.
- The Advanced Fuel Saving Technology and Hemisphere Combustion Chamber System Makes the Gasoline Consumption Become More Efficient. Superior engine water cooling system for improved engine performance.
- Start-In-Gear protection/clutch feature prohibits prop rotation while idling. Lift/tilt feature for shallow water operation and convenience. Perfect match inflatable boats, fishing boats, sailboats, and small yachts. (Pay attention not to test the motor on the ashore but in the water.)
Description
Specifications:
Model: vertical axis, single cylinder, air cool, four stroke, hand pull/electric start
Max. Output: 6.0HP
Stroke: 4-stroke
Bore and stroke: 70x45mm
Displacement(ml): 173
Compression ratio: 7.8:1
Max power : 3.2KW/3600rpm
Max torque: 9N.m/2500rpm
Ignition system: transistor non-contact electronic ignition
Startup model: hand pull / electric start
Noise exhaust method: muffler out machine and emission directly
Outboard model: spline drivehard shaft – spiral bevel gear
Steering: vertical axis, counterclockwise
Installation method: fix racks or intensify bracket
Propeller configuration counterclockwise: three blade or two blade anti-wind
Trim and tilt system :manual tilt
Transmission system:centrifugal clutch
Lubrication method: splash
Lubricating oil: standard hyperboloid gear oil
Reduction ratio:22:15
Built-in fuel tank volume:1.0L
Oil(engine oil) tank volume:0.6L
Packing dimension: 96 x 50 x 38cm
Weight: 29.0kg
Pay attention not to test the motor on the ashore but in the water.
NOTE:
1.Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don’t mix the gasoline with engine oil.
2.The motor couldn’t reach the reverse gear.
3.The propeller and the bottom shaft not installed onto the motor when you receive. It’s easy to install.
5. Zinnor Boat Engine, Outboard Boat Motor 4 Stroke 3.6 HP Heavy Duty Superior Outboard Motor Boat Engine with Water Cooling System – Shipping from USA
Feature
- ✅【INNOVATIVE BOAT ENGINE】Zinnor new version adopt superior engine air cooling system for improved engine performance. Vertical mount engine design for increased power, performance and durability
- ✅【4 STROKE POWER, 3.6HP】Designed with 4 engine strokes, max. output can be 2.6KW/3.6HP. Full throttle operating range (rpm): 5000-6000. Heavy duty lightweight aluminum cast propeller standard equipment
- ✅【360° STEERING ROTATION】Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improved response
- ✅【DURABLE & EASY TO USE】Durable cast aluminum construction for superior corrosion protection. Superior outboard anti corrosion system and anodes for increased durability. Easy pull off engine cover with push button latch for instant motor access
- ✅【WITH WIDE APPLICATION】Perfect match for inflatable boats, fishing boats, sailboats and small yachts. Superior performance and fast start-up to position the motor at multiple angles. We are all here in 24 hours for your service, any using or product quality problems, please contact us directly
Description
Zinnor Boat Engine Outboard Boat Motor helps you make life more easier and enjoyable.
▶Item Features
☑ Features 360 degree steering rotation for reverse without gear shifting.
☑ Superior engine air cooling system for improved engine performance.
☑ Easy pull off engine cover with push button latch for instant motor access.
☑ Vertical mount engine design for increased power, performance and durability.
☑ Twist grip throttle handle and engine stop button for improved response.
☑ Durable cast aluminum construction for superior corrosion protection.
☑ Through the prop exhaust outlet for decreased noise and pollutants.
▶Item Specification
Item Type: Boat Engine
Model: 3.6HP
Max.Output: 2.6KW/3.6HP
Overall L×W×H(mm): 920×365×220cm/36.2×14.4×8.7inch
Transom Plate Height: 42CM
Full throttle operating range (rpm): 5000-6000
Engine stroke: 4
Cylinder: 1
Displacement: 55CC
Net Weight: 9.70KG
Gear Ratio: 2.08(27:13)
Gear Shift Position: Clutch Control
Trim and tilt system: Manual Tilt
Ignition System: CDI
Cooling System: Air-cooled
Starting System: Manual
Control System: Tiller
Integral fuel tank capacity: 1.8L
Recommended Propeller range: 3.5″-6″
Recommended fuel: #93 Lead-free gasoline
Recommended Lubricant: 4 stroke lubricant
Maximum fuel waste: 0.8
▶Warm Attention
1. Please add oil before use new machine. Please use high quality 4 stroke gasoline engine oil. Do not use inferior brand of inferior oil. Add about 350ml of oil. New machine run-in period: 8-10 hours to replace the oil, after run-in period: 30 hours to change the oil.
2. The four-stroke outboard oil tank can only be filled with pure gasoline, and the oil tank should use four-stroke special oil.
6. DOMINTY 2.5HP 4 Stroke Heavy Duty Boat Motor 54CC Outboard Motor Boat Engine w/Air Cooling System for Superior Corrosion Protection
Feature
- Engine Type: 4-stroke, Air-cooled , single cylinder gasoline engine. Displacement: 54CC, Maximum RPM: 7000r/min, Maximum output: 1.50 kw(2.5HP).
- Professional standards performance?Engine air cooling system. Standard Electronic ignition system for easy starting and improved performance.
- Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
- Economical and compact structure. Durable, lightweight and cast aluminum anti-corrosive construction.
- IMPORTANT: Only use oil for 4-cycle engine use. Never use mixed oil for 2-stroke engine use, it can cause spark plug fouling, Exhaust port blocking or piston ring sticking.
Description
Technical Data:
Engine Type: 4-stroke, Air-cooled , single cylinder gasoline engine
Displacement: 54CC
Ignition System: Electronic ignition
Maximum RPM: 7000r/min
Maximum output: 1.50 kw(2.5HP)
Fuel Volume: 1.2L
Fuel Consumption: 500g/kw.h
Starting The Engine:
Before starting the engine, inspect the entire unit for loose fittings or fuel leaks, and the propeller attachment is properly installed and securely fastened.
1.Make sure the throttle twist grip on lowest speed .And the throttle lever switch to “0” position (close).
2..Press the priming pump several times until a fuel flow in the fuel return tube is visually noticed.
3.Move the choke lever to the close position (Right).
NOTE: When restarting immediately after stopping the engine?move the choke lever to the open position (Left).
4.Set the throttle lever to the starting position (“I” position).
5.When holding the unit firmly?pull the starter grip lightly until resistance is felt.Then pull out the starter rope quickly.
6.After the enigne has started?open the choke gradually.
7.Allow the engine to run for 2 to 3 minutes to warm up.
Stopping the engine:
A.Position the throttle lever fully to LOW?let it run for 3-5 mins then stop it.
B.Turn the engine switch to the OFF position (” 0 ” position).
IMPORTANT:
Only use 4-cycle engine oil (about 70-80ml). Never use mixed oil which is for 2-stroke engine, it can cause spark plug fouling, Exhaust port blocking or piston ring sticking.
RECOMMENDED gasoline is above gasoline NO.90 (unleaded gasoline).
RECOMMENDED engine oil is AFI SF GRADE or SAE 10W-30.
Need to replace the engine oil after 6-8 hours when first used. Then replace the engine oil after use 10-15 hours.
7. Outboard Motor Cover 175-225 HP Black Outboard Engine Covers Fit for Motor with 600D Heavy Duty Oxford
Feature
- 【IMPORTANT NOTE】 Please go by the ” HEIGHT ” of your outboard motor, DON’T go by the Hp size. If your motor has a long transom, exchanging for next size up.
- 【EXCELLENT WATERPROOF PERFORMANCE】Our outboard motor covers are made of marine grade 600D heavy duty oxford fabric completely protect your outboard motor against sun, rain, snow and dirt year round. Reinforced seams and waterproof strips at all seams on the back for maximum water resistance to withstand any storms and winds.
- 【CUSTOM BOAT MOTOR COVERS FOR 175-225 HP MOTOR】Perfect Wind-Resistant boat engine cover ,the drawstring hem results in a tight and custom fit to your outboard engine, together with a zipper access for more firmly hold, protect your outboard engine with exceptional security on the windiest and rainy days.
- 【UV RESISTANT】Outboard engine covers own an extra UV resistant coating, which prevents your outboard motor from sunlight aging and fading, offers best protection for your marine engine in the gulf or onshore.
- 【EASY TO INSTALL&STORAGE】Convenient drawstring and zip fastener design, easy to install or remove it in minutes without tools. Drawstring closure on bottom hem cinch the cover tightly to the motor. Excellent for off-season storage or as a quick cover. Comes together with a polyester bag for convenient storage.
8. COP Boat Propeller 7 1/2×7-BA for Yamaha Outboard Motor 4HP 5HP 6HP/ Outboard Propeller for Yamaha 2/4-stroke Engine 6E0-45943-00-EL 7.5×7
Feature
- Diameter(in.): 7 1/2, Pitch(in.): 7, Blades: 3, 9 Spline Tooth
- Fits YAMAHA Outboard Engines 4HP 5HP 6HP
- Material: Made by high quality Aluminum Alloy, improved blade.
- Free return is accepted, Please feel free to buy the prop
- This propeller is after market product. Diameter and Pitch are identical to original OEM ones. We guarantee the performance and quality.
Description
◆ Outboard Engine Propeller OEM Part No.:
6E0-45943-00-EL
6E0-45943-01-EL
◆ Yamaha Propeller Size:
Diameter(in.): 7 1/2
Pitch(in.): 7
NO.S OF BLADE : 3
NO.S OF SPLINE : 9 tooth
◆ Yamaha Engine Prop Application:
Propeller for Yamaha Outboard Engines 4HP 5HP 6HP
1992 4MHQ/4MLHQ /4MSHQ/4MLHR LOWER DRIVE 1
1993 4MLHR/4MSHR LOWER DRIVE 1C
1993 4MSHR LOWER DRIVE 1
1994 4MLHS/4MSHS/5MSHS LOWER CASING DRIVE 1
1995 4MLHT/5MLHT/5MLHT/5MSHT LOWER CASING DRIVE 1
1996 4MLHU/4MLHU2/4MSHU/4MSHU2/5MLHU/5MLHU2/5MSHU/5MSHU2 LOWER CASING DRIVE 1
1997 4MLHV/4MSHV/5MLHV/5MSHV LOWER CASING DRIVE 1
1998 4MLHW/4MSHW/5MLHW/5MSHW LOWER CASING DRIVE 1
1999 4MLHX/4MSHX/5MLHX/5MSHX LOWER CASING DRIVE
1999 F4MLHX/ F4MSHX LOWER CASING DRIVE 2
2000 5MLHY/5MSHY LOWER CASING DRIVE 1
2000 F4MLHY/F4MSHY LOWER CASING DRIVE 2
2001 5MSHKZ/5MSHZ LOWER CASING DRIVE 1
2001 F4MLHZ/ F4MSHZ LOWER CASING DRIVE 2
2002 5MSHA/ F4MLHA/ F4MSHA LOWER CASING DRIVE
2003 F4MLHB/ F4MSHB LOWER CASING DRIVE 2
2004 F4MLHC/ F4MSHC LOWER CASING DRIVE 2
2005 F4MLHD/ F4MSHD LOWER CASING DRIVE 2
2006 and Later F4LMHA/ F4MLH/ F4MSH/ F4SMHA/ F6LMHA/ F6SMHA LOWER CASING DRIVE 2
2006 and Later Rigging PROPELLERS F2.5 THROUGH F20
◆ PACKAGE
1 x Propeller For Boat Yamaha Outboard
????【NOTE】
The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
*Free return is accepted. Quality and performance are guaranteed.
Any questions do not hesitate to contact us.
*To choose your propeller, we kindly advise you to confirm your own propeller’s (1) brand, (2) diameter, (3) pitch, (4) rotation, (5) OEM number, (6) the engine date to be matched by
9. Outboard Motor Heavy Duty High-Speed Inflatable Fishing Boat Motor Engine
Feature
- transistor non-contact electronic ignition and improved performance.
- Start-In-Gear protection/clutch feature prohibits prop rotation while idling.
- Superior engine water cooling system for improved engine performance.
- Durable cast aluminum construction for superior corrosion protection.
- NOTE:We Eapmic are committed to provide excellent customer service,If you have any questions,please contact us.We will try our best to solve your problem.
10. HANGKAI 6HP 2 Stroke Heavy Duty Outboard Motor Boat Engine w/Water Cooling System
Feature
- 【Using 2 Stroke Power, 6HP】Water Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for reverse without gear shifting
- 【Convenient Use and Easy Operation】Travel Safer, More Reliable, More Corrosion Resistant, More Beautiful, More Durable, More Energy Efficient, More Environmentally Friendly.
- 【Compact Design, Fuel Saving, Large Tank Capacity】Fuel saving, strong horsepower, superior performance, environmental protection, durable.
- 【Application】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the motor at several angles.
- 【SHIPMENT】We ship directly from the US warehouse.about 5-7 business days to delivery. If you have any questions or concerns, Feel free to contact us!
Description
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10 hours). (If you do not know how to handle this, please contact with us.)
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don’t do the following will avoid cylinder Scoring:
1. start the motor on the shore
2. use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Technical Parameters:
Dimension
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)
Performance:
Full throttle operating range 5000-6000r/min
Maximum output 4.4KW/6HP
Idling speed ( in neutral) 1000±100 r/min
Engine
Gear positions Forward-neutral-reverse
Gear ratio 2.15(28/13)
Trim and tilt system: Manual tilt
Drive unit
Recommended fuel Regular unleaded gasoline
Integral fuel tank capacity 2.5L
Recommended engine oil 2-stroke outboard motor oil
Engine oil type Genuine or recommended 2str engine oil
Lubrication System Engine oil mixed gasoline
Engine oil mixing ratio Fuel 50: Engine oil 1
Gear oil quantity 195ml(6.6 fl.oz.)
Tightening torque for engine
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
Short shaft: 40cm
Conclusion
By our suggestions above, we hope that you can found 6 Hp Outboard Motor Long Axis for you.Please don’t forget to share your experience by comment in this post. Thank you!