Top 10 35 Hp Go Kart

Briggs and Stratton 550 Series engine runs cooler and cleaner, delivering more power, smoother operation, longer engine life and improved fuel economy. Excellent performer for mid-duty applications. Dura-Bore(r) cast iron cylinder sleeve for extended life, float carburetor for consistent, easy starting, maintenance-free Magnetron(r) electronic ignition for quick, dependable starts, Maxi-Clean(tm) automotive-type pleated paper air filter provides superior protection for long engine life, dual oil filter and drain, dual ball bearings that reduces wear for longer life, 50-state compliant engine, buyer protection package provides two-year consumer warranty.

Centrifugal Clutch 3/4″ Bore 12T, 12 Tooth For 35 Chain, Up to 6.5 HP, 2300 RPM

– Jeremywell Brand Centrifugal Clutch 3/4″ Bore 12 Tooth Heavy Duty Perfect for 35 Roller Chain- Up to 6.5HP Horsepower

– Engagement Speed (RPM): 2,300 Perfect for Go Kart, Minibike, Fun Kart.

Two Set Screws are included in the bag, please open the bag with caution, it may drop out.

Dimensions: #35 Chain
Pitch: 3/8″
Roller Diameter: .200″
Roller Width: 3/16″,Works with 15 inch tires

FITS:Honda GX160 Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc Nearly all 5.5 HP clones Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands.

Specifications:
– Material: Iron
– Package Dimensions: (13.77 x 4.92 x 5.91)” / (35 x 12.5 x 15)cm (L x W x H)
– Weight: 4.76 lbs / 2.16 kg
– 3/4″ Bore
– Tooth: 12
– #35 Chain: 4ft
– Fitment: Minibike, Go Kart, Lawnmower
– Replacement: Comet, Predator, Manco and more
– Features: Durable, Maximum torque, Wear-resisting, Fast heat dissipation

Package Includes:
1 x Centrifugal Clutch
1 x #35 Chain

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:ModelSpec and/or Type NumberCode and/or Serial NumberYear Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend. – The ROP Shop Staff

TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan

Specifications:
Driver Clutch Bore: 3/4"
Driven Clutch Bore: 16mm
Driven Clutch Dia: 157mm or 6"
Sprocket: 12 teeth for #35 chain
Belt: Asymmetrical type
Belt Top Width: 19mm(3/4")
Engagement Speed: 2200±200 RPM
Recommended Engine: 2HP – 8HP engines, 3/4" shaft with flat key

Fits all engines with a 3/4" Straight Crankshaft.

This Kit Includes:
1x Drive belt
1x Driver pulley
1x Driven pulley 16mm bore 6" diameter
1x Plastic cover
1x Full mounting hardware kit
1x 12 Teeth sprocket for #35 chain(chain not included)
1x Aluminum mounting backplate

This kit has everything you will need!!
Please see pictures for all that is included.

This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.

Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).

This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments. 

Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Engine compatability:  Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.

Specifications:

Specifications:
1. Material: Iron
2. Package Dimensions: (15.35 x 4.72 x 4.72)” / (39 x 12 x 12)cm (L x W x H)
3. Weight: 5.07 lbs / 2.3 kg
4. 3/4″ Bore
5. Fitment for: Go Karts 30 Series
6. 10 Tooth Sprocket for #40/41/420 Chain,12 Tooth Sprocket for #35 Chain(Tooth and Chain aren’t included)
7. Replacement for:Comet,Manco and more
8. Features:Durable,Maximum torque,Wear-resisting,Fast heat dissipation

Package Includes:
1 x Torque Converter Clutch

Specifications:

Outside diameter: 4 3/4″
Total width: 3″
Clutch back to sprocket: 2 1/2″

Fits:
2-6.5hp Honda & Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200
Perfect For Go Kart Minibike Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior)
Common clutch for 3.5-7hp engines using #40/41/420 chain
Briggs & Stratton and 2 – 6.5 HP With 3/4″ Shaft
Tecumseh Engines 2 – 6.5 HP With 3/4″ Shaft
Set Screws NOT Included. Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
( Clutch does not need set screws as long as the end of the crankshaft is threaded to accept a bolt. Most go kart clutches are held onto the shaft with a bolt and larger washer. Extra washers if needed are used on the crankshaft to space clutch. )