527 reviews analysed
1. Issyzone fits Kawasaki Ninja 300 250 Fender Eliminator Kit Tail Tidy 2013 2014 2015 2016 2017 2018
Feature
- Fit Kawasaki Ninja 250 / Ninja 300 2013 2014 2015 2016 2017 2018
- Note: Do not come with a turn signal light! But you could use the stock turn signals with this fender eliminator
- The ninja 250/300 fender eliminator’s bracket is thick and sturdy as well as the coating/paint
- The LED mounting nuts and the mounting nuts to the bike are anti-back off nuts, fits easily and makes the back end of the bike look much much better
- 【Note】:Quality product offered by us, please contact us if any question with the product
2. iBrightstar Newest 9-30V Super Bright Low Power 1157 2057 2357 7528 BAY15D LED Bulbs with Projector replacement for Tail Brake Lights,Brilliant Red
Feature
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v,Size: 1.75″x 0.94″ x 0.86″
- Fits:1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p21/5w etc.Easy installation, plug and play.
- Application:Brake Lights,Tail Lights,Daytime Running Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage:Exclusive design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Note:iBrightstar LED are strictly tested for sale!!! We offer fully ” ONE YEAR ” guaranteed for manufacturer defect.
Description
Features
Dual Brightness: The Dim mode is Tail lights or DRL, while the Bright mode is Brake lights or Turn Signal lights.
High Brightness LED: 54SMD 3014 chipset & 3SMD 3030 chipset.
Working Voltage: 9-30V (fit 12V, 24V vehicles).
Output Wattage: 3W/bulb (Low Power Consumption).
Color: Brilliant Red.
Service Life: Up to 30,000 Hours.
Note: Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
Warranty: iBrightstar Warranty for 1 year from date of purchase. Warranty type: Exchange or replacement.
IMPORTANT NOTICE! Please confirm the bulb base before placing an order.
iBrightstar is a registered brand with Amazon. Please contact us if there is any questions or other requests! Please check the bulb base before placing an order. If the customer order a wrong size it will cause doesnt fit their car. Since LED bulbs have no wattage with the stock bulbs and resulting in a smaller currentwhen the car system detected the current smaller than before it will cause flasher to hyper flashing or created error. Requires a resistor or flash relay to prevent the hyper flash.
3. ANKIA 40-LED 40W Motorcycle Tail Light Integrated Running Lamp Brake&Turn Signal Light with License Plate Bracket for Harly Motorcycle Street Bike Cruiser Chopper (Black)
Feature
- Voltage: DC 12V
- Wattage: 40W (1W/LED)
- Material: LED + Metal License Plate Bracket + PC Lens
- Can be used as a running & brake lamp,turn signal light and tail light
- Fits Most Motorcycle, Street Bike, Cruiser, Chopper such as Harley / Honda/ Kawasaki / BMW / Yamaha / Suzuki / Ducati / Benelli / Aprilia (may need tiny modification for some models)
- 5 wires connection system.:(Black for Negative, Red for Brake Light, Yellow for Running Light, Blue for Turn-Left Signal Light, Orange for Turn-Left Signal Light)
- Package includes: 1X Motorcycle Integrated Tail Light with License Plate Bracket
Description
Specifications:
Condition: 100% Brand New
Package includes: 1X Motorcycle Integrated Tail Light with License Plate Bracket
Voltage: DC 12V
Size (approx.): As the picture shown
Lens Color: Smoke
Bracket Color: Black
Wattage: 40W (1W/LED)
Number of LED: 24 X Red + 12 X Amber + 4 X White
Screw Diameter:
Tail Light: 4mm
License Plate Bracket: 6mm
Adjustable Mounting Slot Spacing(As the picture shown): Cable Length: 12″”(31cm)
Material: LED + Metal License Plate Bracket + PC Lens
Weight: 380g
Feature:
Designed for Most Custom Motorcycle
Can be used as a running & brake light or marker light.
Super bright high power bulb provides maximum visibility & safety.
Complete with license plate bracket, black powder coat over metal housing.
Upgrade your motorcycle a Unique Style Appearance
Fitment:
Fits Most Motorcycle, Street Bike, Cruiser, Chopper .
Such as Harley / Honda/ Kawasaki / BMW / Yamaha / Suzuki / Ducati / Benelli / Aprilia
May need tiny modification for some models.
* Note:
* Please Read All Description and Fitment Before Ordering the Product.
* Professional installation recommended! “
4. NINEO H7 LED Headlight Bulbs,CREE Chips 12000Lm 5090Lux 6500K Extremely Bright All-in-One Conversion Kit,360 Degree Adjustable Beam Angle
Feature
- SUPER BRIGHT – Utilizing Customized CREE Chips,each led headlight bulb can light up to 5090 lux and 6000 lumens@6500k extremely white light with perfect beam pattern,5 times brighter than stock halogen,beating 95% lower intensity LED and HID kit on the market.
- ADJUSTABLE MOUNTING – Besides brightness,we have designed the latest 360 degree fully adjustable mounting collar,you can make a simple angle adjustments for proper alignment of the bulb mounts to get the perfect light output and correct beam pattern.
- 360 DEGREE LIGHT DISTRIBUTION – Boldly Utilizing ultra-thin side design,LED side face only has 3.45 mm,ensure 360 Degree uniform light without any dark spot,provide wider viewing angle,ensure your safety.
- MAXIMUM HEAT DISSIPATION – Unique coverless dual ball bearing fan design,combined 12,000 rotations per minute,and built with double folding copper core thermal heatsink,ensure maximum heat dissipation,make NINEO headlight shine up to 30,000 hours.
- EASY INSTALLATION – The heatsink part only has 23.5 mm length,fit for 95% vehicle,after installation,there are enough space for the headlight breathing. Can be installed in 20 mins.Plug and play. And we offer 1 year warranty and lifetime support.
5. BSK 2012-2016 Kawasaki Ninja 650 / 650R / ER-6f / ER-6n Integrated Sequential LED Tail Lights – Smoked Lens
Feature
- Fitment: Kawasaki Ninja 650 650R ER-6N ER-6F 2012-2016
- Equipped with a Smoked Lens, Amber Turn Signals.
- Each tail light unit comes with a factory type brake light harness, as well as OEM plug and play turn signal connectors to make installation fast and simple.
- Formed to perfectly replicate OEM dimensions and is constructed with high quality polycarbonate for correct optical clarity. You will not find a better fitting or brighter after market LED Tail Light.
- Number of LED: 15 Pcs.Ultra bright LED tail light with built in turn signals
- Each LED board hosts a matrix of super high intensity LEDs that provide intense luminescence and excellent visibility in a variety of conditions. The interior of the tail light housing contains a topographically designed reflective surface to further amplify the intensity of the LEDs and increase overall visibility
Description
Kawasaki Ninja 650 650R ER-6N ER-6F fIntegrated LED Black Tail Lamp Rear Turn Signal Brake Stop Light
Features:
Easy Installation With Stock Plug-In(Plug & Play) Device For Brake/Taillight.
Direct replacement fit to the original stock units.
Requiring NO further modifications.
Integrated Tail Lights not only come with LED boards, but also include built in LED Turn Signals.
No external resistor is required when using the turn signal.
Specification:
— Feature:
— Voltage:12V
— Weight:220g
— Quantity: 1pcs tail light
— 100% brand new
Item Fitment:
2012-2016 Kawasaki ER-6f
2012-2016 Kawasaki ER-6n
2012-2016 Kawasaki Ninja 650R
Tips: If you do not need the function of turn signal light,please do not connect it. Thank you.
Advantage:
1.BSK Integrated LED Tail Light provides the perfect solution for streamlining the appearance of your motorcycle by eliminating bulky turn signal housings without sacrificing function.
2.Each lens is formed to perfectly replicated OEM dimensions and is constructed with high quality polycarbonate for correct optical clarity.
3.Each LED board hosts a matrix of super high intensity LEDs that provide intense luminescence and excellent visibility in a variety of conditions.
4.The interior of the tail light housing contains a topographically designed reflective surface to further amplify the intensity of the LEDs and increase overall visibility.
5.Each tail light unit comes with a factory type harness to make installation fast and simple.
We are committed to providing our consumer with high quality products, therefore, if there is anything wrong with the product, please don’t hesitate to contact us. We will reply you as soon as possible！
6. TUINCYN Motorbike Integrated LED Brake Light & Turn Signals Indicator Light Blinker Lamp 2 in 1 Motorcycle Rear Stop Break Light Motor Bulb Mounting Accessories(Pack of 1)
Feature
- Motorcycle LED Tail Brake Light with Turn Signals, 100% Brand New Aftermarket Taillight.
- Working Voltage: DC 12V, Wattage: 3.6W, Color: Red Light, Black Shell, Red Lens, Light Size: Approx. 4.3 * 1.6 *2.0inch.
- Quality 2 in 1 Taillight Fits Most Motorcycle/Choppers/Touring/Custom Bikes, Such as for Harley, for Yamaha, for Kawasaki, for Honda, for Suzuki, ect.
- Used for Motor Motorcycle Motorbike Turn Signals Light, Blinker Light, Rear Brake Stop Light, Indicator Light, Daytime Running Light.
- Please Confirm the Size of the Motorcycle Tail Light Light Before Ordering! TUINCYN Offers “TWO YEAR” Warranty On Items Damaged During Delivery Or Have A Confirmed Manufacturer Defect. Please Buy with Confidence!
7. NINEO 9007 LED Headlight Bulbs CREE Chips,12000Lm 5090Lux 6500K Extremely Bright All-in-One Conversion Kit,360 Degree Adjustable Beam Angle
Feature
- SUPER BRIGHT – Utilizing Customized CREE Chips,each led headlight bulb can light up to 5090 lux and 6000 lumens@6500k extremely white light with perfect beam pattern,5 times brighter than stock halogen,beating 95% lower intensity LED and HID kit on the market.
- ADJUSTABLE MOUNTING – Besides brightness,we have designed the latest 360 degree fully adjustable mounting collar,you can make a simple angle adjustments for proper alignment of the bulb mounts to get the perfect light output and correct beam pattern.
- 360 DEGREE LIGHT DISTRIBUTION – Boldly Utilizing ultra-thin side design,LED side face only has 3.45 mm,ensure 360 Degree uniform light without any dark spot,provide wider viewing angle,ensure your safety.
- MAXIMUM HEAT DISSIPATION – Unique coverless dual ball bearing fan design,combined 12,000 rotations per minute,and built with double folding copper core thermal heatsink,ensure maximum heat dissipation,make NINEO headlight shine up to 30,000 hours.
- EASY INSTALLATION – The heatsink part only has 23.5 mm length,fit for 95% vehicle,after installation,there are enough space for the headlight breathing. Can be installed in 20 mins.Plug and play. And we offer 1 year warranty and lifetime support.
8. MZS Tail Light Turn Signal LED Integrated Blinker for Kawasaki Ninja 250R Ninja250R EX250 2008 2009 2010 2011 2012 Smoke
Feature
- NOTICE – This is an aftermarket parts, not an OEM part, it will fit the models listed. Before purchase, please make sure it will fit your model and year.
- HIGH QUALITY COMPONENTS – MZS tail light use high quality ABS injection molded housing and UV protected lens element
- FUNCTION – This tail light can be used as running light, brake light, turn signal light(turn left/right), Dual mode red/yellow LEDs, is used to illuminate the license plate, as well as as a light sign behind, warning the car behind, the brake in order to maintain a certain distance. Providing good visibility, it makes your driving much safer.nd turn signals
- INSTALLATION – Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. So before install, please check the fourth Installation instructions picture on products page.
- QUALITY ASSURANCE – MZS value the shopping experience and satisfaction of each customer, so we provides lifetime technical support and 6 months damage replacement services. No matter what the problem, please contact us first, we will do our best to solve any problem for you.
Description
Specification:
- Condition: 100% Brand New
- Material: Machined from High ABS Plastic and UV protected lens element
- Working Voltage: DC 12V
- Turn Light Color: Amber
- Brake Color: Red
- Lens Color: Smoke
Package Includes:
- 1 Piece x Rear LED Tail Light
- Instructions Included (Please check the product picture)
Features:
- This LED integrated tail light is direct replacement of stock tail light
- Enhance the look with this integrated LED Tail Light with Turn Signals
- Taillight consists of Running, Brake,(red) and Turn Signal Lights (amber)
- This center-mount running and brake light commands the attention of following vehicles
Fitment:
- 2008-2012 Kawasaki Ninja 250R
Other MZS Universal Motorcycle products(ASIN):
- H4, H7 LED Headlight bulbs (B07BFPQMGH, B07BGX51G2)
- Motorcycle LED Light Kit (B07HYWJW3J)
- 6mm, 8mm, 10mm Swingarm Sliders (B07HQ5L5QY, B07HQCNQJN, B07HQ6BP6H)
- Bar End Mirrors (B07LBLNP23, B079KBDC9Q, B07LBLNP23, B07QDM5FH6)
- Universal 8MM 10MM Mirrors (B079KBDFGC)
- Motorcycle Cover (B07RX9DKRP, B07S2H9MBS, B07S2GD9P9, B07S1DM65Y)
Quality Assurance:
- MZS value the shopping experience and satisfaction of each customer, so we provides lifetime technical support. No matter what the problem , please contact us first, we will do our best to solve any problem for you.
9. 4 X Motorcycle Motorbike Turn Signal LED Light Indicator For Yamaha Honda Suzuki Kawasaki Harley Davidson DUCATI BMW KTM BUELL APRILIA Triumph
Description
SIZE : 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″ 13/16″ 7/8″
10. Cara 40W 40-LED Motorcycle Tail Light Integrated Running Brake Lights Turn Signal Lamp License Plate Bracket for Harley Honda Yamaha Suzuki Kawasaki (Black)
Feature
- INTEGRATED DESIGN 5 IN 1 – LED Tail Light, Brake Stop Light, Running Light, License Plate Light & Turn signals light
- UNIVERSAL FIT – Fits Most Motorcycle, Street Bike, Cruiser, Chopper such as Harley / Honda/ Kawasaki / BMW / Yamaha / Suzuki / Ducati / Benelli / Aprilia (may need tiny modification for some models)
- WITH METAL BRACKET – Complete with license plate bracket, black powder coat over metal housing
- EASY INSTALLATION – Adjustable mounting holes make it easy to install.
- BRIGHT & SAFETY – Super bright high power bulb provides maximum visibility & safety. With 40 LEDs (24*Red, 12*Yellow, 4*White), very bright, safe running in traffic in day or night.
Description
Specification:
Voltage: DC 12V
Wattage: 40W (1W/LED)
Material: LED + Metal License Plate Bracket + PC Lens
Bracket Color: Black
Number of LED: 24 X Red + 12 X Amber + 4 X White
Screw Diameter:
» Tail Light: 4mm
» License Plate Bracket: 6mm
Adjustable Mounting Slot Spacing(As the picture shown): Cable Length: 12″(31cm)
Wiring:
Ground = Black
Brake and License Plate Light = Red
Running and License Plate Light= Yellow
Turn Signals = Orange(right)/Blue(left)
Package includes:
Motorcycle Integrated Tail Light with License Plate Bracket
Feature:
INTEGRATED DESIGN 5 IN 1 – LED Tail Light, Brake Stop Light, Running Light, License Plate Light & Turn signals light
UNIVERSAL FIT – Fits Most Motorcycle, Street Bike, Cruiser, Chopper such as Harley / Honda/ Kawasaki / BMW / Yamaha / Suzuki / Ducati / Benelli / Aprilia (may need tiny modification for some models) WITH METAL BRACKET – Complete with license plate bracket, black powder coat over metal housing
EASY INSTALLATION – Adjustable mounting holes make it easy to install.
BRIGHT & SAFETY – Super bright high power bulb provides maximum visibility & safety. With 40 LEDs (24*Red, 12*Yellow, 4*White), very bright, safe running in traffic in day or night.
Conclusion
By our suggestions above, we hope that you can found 2013 Ninja 650 Oem Tail Light for you.Please don’t forget to share your experience by comment in this post. Thank you!
