Top 10 15 Hp Vfd

This Series has better performance stability and adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency,We are the original manufacturer£¬welcome to consult with us!
Parameters

Suitable Motor:< 7.5kw(11hp)="">
Model: V8 2S 7R5GB
Power: 7.5KW 10HP 220V
Input: 1PH AC220V¡À15% 50Hz / 60Hz
Output: 3PH AC0-220V 32A 0-400HZ
Package include: 1xVFD;1x English User Manual book

Features

¡ñHigh startup torque and Excellent low speed stability;Strong overload capability.
¡ñAdvanced calculous PID closed-loop arithmetic, quick responding speed and high suitability.
¡ñRich of AI & I/O port, RS485 communication port, well work with Mach3 controller.
¡ñEasy PLC function can realize 16 legs of speed and inverter control function.
¡ñSupports various encoders such as differential encoder,open-collector encoder,resolver and UVW encoder.
¡ñSupports three control modes,sensorless vector control(SVC),closed-loop vector control(CLVC) and V/F control.
¡ñSupport add External braking resistor(1000w ≥ 16Ω) and potentiometer(recommend 10K).
¡ñBroad voltage working area, normal running in 304V-456V.
¡ñAuto voltage regulation (AVR) technique, for ensuring the inverter load capability.
¡ñVarious control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes.
¡ñDead-time compensation and auto torque slip compensation function, can realize 180% high orque output at low frequency 0.25Hz.
¡ñUnique EMC design, can minimize inverter’s pollution to power.
¡ñOverall reinforcement layer to suit all kinds of harsh environment.

Introduction

This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.

Technical Parameters

Input voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
Input Frequency: 48 to 63 Hz
Output Frequency: 0 to 400 Hz
Input Phase: 1 or 3 phase as you like
Output Phase: 3 phase

Features

1.Our item adopts the Japan Mitsubish chip;
2.PID control; advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
3.Easy PLC function can realize 16 legs of speed and inverter control function;
4.RS485 communication port, adopting standard international MODBUS main circuit control;
5.With extremely strong anti-jamming capability;
6.Low output ratting torque, low speed running ability;
7.Carrier adjustable by 16KHZ, completely soundless working environment;
8.Broad voltage working area;
9.Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
10.Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes

Specification:

Basics Model GK3000-SP1S1-2d2

Capacity 3 hp (2.2 kW)

Shipping weight 3 kg

Dimension 118*185*157 mm

I/O Feature Rated current 10 A

Control Feature Control mode V/F control; vector control

Communication Offer RS485 communication interface, support MODBUS-RTU communication protocol

Speed regulation 1:100

Start torque 150% of rating torque at 1 Hz

Speed control accuracy ≤±0.5% of rating synchronous speed

Frequency precision Digital setting: max frequency x± 0.01%;

Analog setting: max frequency x± 0.2%

Frequency resolution Analog setting: 0.1% of max frequency;

Digital setting: 0.01Hz

Torque boost Automatic torque boost, manual torque boost 0.1%~30.0%

Interior PID controller Be convenient to make closed-loop system

Automatic energy save running Optimize V/F curve automatically based on the load to realize power save running

Automatic voltage regulation (AVR) Can keep constant output voltage when power source voltage varies.

Automatic current limiting Limit running current automatically to avoid frequent over-current which will cause trip

Environment Enclosure rating IP 20

Temperature –10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%

Humidity smaller than 95%RH, non-condensation

Altitude ≤1000m; VFD will be derated if above 1000m

Vibration Less than 5.9 m/s2 (0.6 g)

Cooling forced air cooling

Store environment –20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Specification:

Basics    Model    GK3000-SP1S1-d75

Capacity    1 hp (0.75 kW)

Shipping weight    3 kg

Dimension    118*185*157 mm

I/O Feature    Rated current    4 A

Input voltage    1 phase 120V AC ±15%

Input frequency    50Hz/60Hz

Output voltage    1 phase or 3 phase 220V AC ±15%

Output frequency    0.00~400.00Hz

Control Feature    Control mode    V/F control; vector control

Communication    Offer RS485 communication interface, support MODBUS-RTU communication protocol

Speed regulation    1:100

Start torque    150% of rating torque at 1 Hz

Speed control accuracy    ≤±0.5% of rating synchronous speed

Frequency precision    Digital setting: max frequency x± 0.01%;

Analog setting: max frequency x± 0.2%

Frequency resolution    Analog setting: 0.1% of max frequency;

Digital setting: 0.01Hz

Torque boost    Automatic torque boost, manual torque boost 0.1%~30.0%

Interior PID controller    Be convenient to make closed-loop system

Automatic energy save running    Optimize V/F curve automatically based on the load to realize power save running

Automatic voltage regulation (AVR)    Can keep constant output voltage when power source voltage varies.

Automatic current limiting    Limit running current automatically to avoid frequent over-current which will cause trip

Environment    Enclosure rating    IP 20

Temperature    –10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%

Phase Converter AD15 – 15 HP Digital Smart Series. Condition: New, Best for: 7.5 HP Any load, especially resistive, rectified and computer loads such as CNC, VFD, EDM, battery chargers. For a 15HP load, see our AD30 Single motor start: 7.5HP | CNC: 7.5HP/5.6kW | Resistive: 21 amps. This 15 HP SMART Series Phase Converter is manufactured in the USA by American Rotary and provides strong, utility grade 3-phase power from single phase power for any equipment. AD series phase converters are specifically suited for CNC, VFD, rectified and any other voltage sensitive equipment. American Rotary engineers the entire phase converter system to provide optimum performance. Our variable impedance generator (VIT)TM and MicroSmartTM controller combine to make the most powerful and precise rotary phase converter on the market. Shown with optional Isolation Mounts. Other accessories available: Three Phase Breakers, Load Centers, Plugs, Outlets, Disconnect Switches, 480V, Nema 3R, TEFC, UL Listing. 5 Year Warranty! Call Us with any questions at Toll-Free 888-743-6832

15 hp, 200-230V; Max amps 42.0 One Year Manufacture Warranty – Factory tested

If you are a system integrator, original equipment manufacturer or panel builder, the ACS355 is ABBs top tier micro drive. It is focused on material handling, food and beverage applications, processing of rubber, plastic and wood. You have a cost effective, versatile drive offering the best connectivity in its class. Installation and commissioning is simple and easy, saving you labor time.

The SMVector technically advanced inverter variable frequency drive continues Lenze ? AC Tech?s tradition of innovative compact inverter design.